Search found 8 matches

Thank you very much Ttelmah, changing as you said all is ok.

Bye

If you see the ccs help you can find this:

-----------------------------------------------------------------------------
How do I write variables to EEPROM that are not a byte?

The following is ...

An EEPROM write puts the PIC to sleep for about 1 to 5ms (depending on the PIC). You may lose interrupts during this time.
_________________
Regards, Andrew

Ok, but the serial problem arises from ...

Anyone has just had a problem on serial after a write_eeprom function??

I'm using a 16f876 pic which performs a control of an automatic window open close motion. I control the micro on site or by a ...

int32 dv=10;

for (i=0; i<8 ; i++ )
{
if (num<(dv/10))
led_data[i] = SEGMENT_CHAR_BLANK;
else
led_data[i]=(num%(dv))/(dv/10);

dv *= 10;
}

Caution: I have not teste ...

Thank you, i'm using a 16F876A, but I checked that it hasn't the EUSART. I 'll try to wire the EXT_INT pin.

Thank You

Paolo

Something like that:

int32 dv=10;

for (i=0; i<8 ; i++ )
{
led_data[i]=(num%(dv))/(dv/10);
if (num<(dv/10)) led_data[i] = SEGMENT_CHAR_BLANK;
dv *= 10;
}

Caution: I have not tes ...

HALLO ALL

I have a program that controls a door open close, all is ok and when the engine is off the pic is set in sleep mode. The sleep mode is then reset by the ON button press.

Now I need to ...