Search found 41 matches

Hey Mike

I've been trying now using 350 as the maximum value duty cycle. The array for now has 292 entreis. NO PREMATURE PULSES FOR NOW. I will continue adding entries and testing. The array will e ...

hey guys

I did what mike suggested. The problem still exists at higher duty cycles. I also checked the chip. It's a 2009 one.
I will now move to eight bits and will feed you back if the problem pe ...

Hey guys and sorry for being late. I Was a little bit busy.

Here's what happens when i use T's code:

http://www.4shared.com/photo/i7OrhWns/new.html?

The fifth duty cycle gets smaller. AND, i ...

Guys I went with your suggestion but still having the same problem. I will try T's idea of doing everything n the main loop. Will feed you back with results. If any other ideas please Let me know

Ttelmah, try this. i hope it will work

http://www.4shared.com/photo/ZtYzIMm5/DSO_Proteus_32-point_array.html?

mike
wether fifth or first. there i a problem that i must solve. please help me work it out

thanks

Mike
Could be

T check this

http://www.4shared.com/photo/HSMUphwe/Untitled.html?

Mike, I treated the inverting point with T's code. Inversion is now fine.However, thi is not the main problem. The main problem is what i showed in the photo linked above. "The fifth PWM problem& ...

Hey Ttelmah. Thanks for the code. I appreciate what you are trying to. I did understand your point before but i didn't program it because i'm trying to fix the problem shown in the attached photo abov ...

from both real scope and proteus simulation. i get the same results. thats why i'm sure proteus is correctly simulating my case.

As for Proteus, well i do have hardware and I've been comparing results. in my case Proteus is correctly simulating.

Here's the code Mike

#include <12F683.h>
#device adc=10

#FUSES NOWDT //No Watch Dog Timer
#FUSES INTRC_IO //Internal RC Osc, no CLKOUT
#FUSES CPD //Data EEPROM Code Protected
#FU ...

hey guys

I went with T's suggestion and reduced the points to 32. One array of 32 points only.

Here's how PWM looks!!

http://www.4shared.com/photo/HSMUphwe/Untitled.html?

WHY the fifth pwm ...

Hey temtronic

yeah T's is totally right in his point.

As for the other three '40-points', well they are to be used later in feedback. My method of feedback is to read the output (220v), and then ...