Search found 14 matches

Thanks PCM,

Just what I needed. Thanks to everyone for your fast reply.

Best Regards,
Tim

My install CD is quite old, I have upgraded several times to V3.249. Do you know if the downloaded upgrades include the most recent version of the manual?

Thanks

Does anyone know where I can download the V3.249 manual? I tried "google" for CCS V3 manual, found nothing.

Thanks

Hi Ttelmah,

I got it to work, thanks for the help.

Tim

I see that they also relocate the reset vector but in my bootloader I put the start-up for user code at the end of flash myself so the cpu_reset() in my user code goes back to the bootloader. My bootl ...

The code at the top of the post is my main code and it is set to start at address 0x2000, the first four startup locations are placed at the end of the code memory along with some flags used to hand t ...

Ok,

I tried in my bootloader the

#int_GLOBAL
void relocated_interrupt
{
goto_address (0x1000);
}

and the printf statement in my main code printed but I can't get th ...

Hi Ttelmah,

I thought about your post and added to my bootloader the following:

#int_GLOBAL
void relocated_interrupt
{
goto_address (0x1000);
}

and my interrupt and t ...

Hi,

I'm trying to learn how to use interrupts from a timer here is my code

#include <18f4620.h>
#include <stdlib.h>
#fuses NOLVP, NOWDT, EC_IO, NOBROWNOUT

#ORG 0x2000, 0xFFFC ...

Thanks for the quick reply, I think I found my problem, I use the Melabs Epic programmer and just updated the programmer software. The config programming was turned off, I set this to on and re-progra ...

Hello all,

I have a 18lf4620 and it resets on it's own. I used the reset_cause() func and it tells me the WDT is responsible. I have NOWDT set in the fuses. Thanks in advance for any help, here is ...

Funny thing, I tried this ( two 135 byte arrays ) each array ran fine for the first 110 bytes, then produced junk. Then I tried two 100 byte arrays and one 70 byte array. the first array was fine the ...

Hi, having a problem with arrays on the 18f252 part with compiler version
PCW 3.115 IDE version 3.21. The array reads back fine untill element 244
after 244 it reads back junk. I have tried the #loc ...

Has anyone used this chip (W3100A) with a PIC micro? I'm looking for some sample code to help me implement the chip with it's I2C interface.