Search found 35 matches

Hi Mike and all,

Having read the PIC 18F2580 data sheet and the CCS C manual regarding the TIMER 2, I still cant seem how to piece together how the three arguments that go into the setup_timer_2(); ...

Hi All,

@Mike Walne:

Thanks for the reply. I really appreciate the code.

There's just one bit I need to clearly understand is the 249 setup_timer_2(T2_DIV_BY_16, 249, 1);

Based on the CCS ...

Hi Ttelmah,

Thanks for the reply.

I don't fully get the following bit of your suggestion below:

Then your four instructions selecting the different things to do, are all executed before the ...

Hi all,
Following the advice from Mike Walne plus the sample code in the CCS C compiler manual the code below is my first attempt to enable the multiple operation of relays using a timer and its inte ...

Hi all,
Apologies if this sound trivial but currently I’m stuck in terms of figuring out the logic to complete what I suspect is a fairly easy task.

I’m currently turning on my LEDs for a cert ...

HI Guys,

Any ideas regarding my last post as seen above?

Thanks.

Hi ezflyr,

Thanks for the reply. Sorry for my incorrect use of string. I'm used to saying string as I also write Java code.

I've added your suggestions in my code as seen below and when I send ...

Hi all,

I was able to overcome my RS232 hardware issues by purchasing the following add on board from Mikro Elektronika - http://www.mikroe.com/downloads/get/1276/max232_manual_v100.pdf.

I can ...

Hi asmboy,

I intend on measuring temperature ranges between -30 degrees Celsius to 45 degrees Celsius hence the reason I selected the LM35 which is rated for full -55 degrees Celsius to 150 degrees ...

Hi ezflyr,

As you mentioned in your post I'm also expecting a response in the following manner

A : 1
B : 1
C : 1
Z : 2

but what appears on my terminal program is around the lines

A ...

Hi Ttelmah,

Thanks for the reply.

2) Many of the later low power chips have drivers with lower drops, and generate less from the charge pumps. The Atmel 'near equivalent' chip you pointed to ...

Hi ezflyr,

Thanks for the reply. I'm definitely not showing you my interpretation of which characters are being sent back by the PIC but showing you exactly what the PIC is giving back through the ...

Hi ezflyr,

If it were me, the next step would be to get the serial interrupt routine working correctly. I would not bother to use the LEDs for this stage of my troubleshooting as you'll get muc ...

Hi ezflyr,

I'm trying the fprintf(PCTWO, "%c : %u\n\r", RcvChar, RxState); at the moment and will get back with the outcome.

Thanks,
Alex

HI ttelmah,

Thanks for the reply. I've cross checked the polarities of the capacitors (I went through this guide http://www.wjoe.com/capacitorinfo.htm just to make sure I was cross checking the pol ...