Search found 16 matches

Format function does not work on PCD compiler.

So far, so good. Used it on pic 18f series and dsp30. Does anyone know how to use the profiler. The instructions are very vague.

Thanks,

After loading the latest version, compiler generates wrong code for dsPIC30F6015, doesn't appear to work at all when target is loaded. Also, ICD debug features not working. ICD loads correctly and whe ...

If running under 5 volts and you can't erase and program, apply 5 volts and all seems to work normally.

I dont know what happened to fuses, But when I ran from 5 volts, I was able to erase and program chip, with original program that stopped it from working in first place...Just a quirk of chip I guess. ...

I tried to download with 4.124 and 4.119 of compliers. The boards are all functioning correctly. I have downloaded firmware to them 100's of times. On the last download it failed.. I suspect the eepro ...

I had a working program, I made some small changes to the code, not fuses, when I now true to program the chip, I get verification errors. The compiler is 4.124 and CCS load 4.023. I suspect the code ...

Is it possible, if by accident, the protect bit was set, would that prevent the chip from being erased and not be programmable any more. Or should a chip erase wipe out that bit also...I wrote a quick ...

Hi Tem,

I have many versions of code, none of them will download (all worked before). The boards are home made, and were working very well. They are in 2 different locations, both were working. Whe ...

I had a working program, I made some changes to code, it compiled with no errors, but now I get a verification error when I try to download. It may be caused by a write protect fuse being set. I did n ...

I have tried numerous solutions to ULPWU interrupts. They all seem to work at times. But often they do not work when other interrupts are active after the call. Can someone please give example that wi ...

Has anyone upgraded to 4.125 and if so, had the ICD stopped working? Evil or Very Mad

Thanks Guys for info. I just updated the compiler to 4.125 and now the debugger stopped working. Dont know what the problem is yet.

Hello,
I am trying to use Timer1 as a one second counter interrupt. I have put the initialization in a function. When I call the function to start timer and enable interrupts, all code after the call ...

I assume you mean the time from transmission of pulse to return..Radar typically run at 3+ ghz. way to high for pic