Search found 16 matches

Thanks Ttelmah for your answer.

I understood what you've said. If i can't make it with CCS, maybe I can try to write a program in Visual Basic that supports hyperterminal features in order to show ...

Hello everyone,

i want to make a datalogger with my PIC. I wonder if i can save for example, a Temperature measure to my Desktop in a text document, via RS232. Is something like that possible using ...

Hello everyone. I need your help with DHT22 sensor and PIC24FJ64GA002. According to a previous topic, i tried to compile your code to my project, but my hyperterminal is blank - i don't receive any me ...

I changed this line as you've told me, and i tried also:

get_gapture = (1, TRUE);

according to PCD Manual, but i had the same results.

Hello guys. I read carefully what you have written to me. I've read the PCD Manual and I understood many things.

Temtronic excuse me, it was a terrible mistake that '11' in setup_capture() line, yo ...

So, I've changed this line:

setup_capture(PIN_B4, CAPTURE_FE);

with this line:

setup_capture(11, CAPTURE_FE|capture_timer1);

and the result is exactly the same. I h ...

Excuse me if I don't make it clear Smile

. I will make it as much as I can.

I want to create a program that measures a frequency with OC1 module and then, i want the hyperterminal to give the measured ...

Hello everyone,

I have made the same topic with PIC18F4550. I had the same problem but we have found a solution, so I tried to do this with this PIC.

I changed a little bit the program again, b ...

Thanks

that was really helpful.

Thanks guys for all the information that you gave me...

So, i tried everything except to update my Compiler to 4.141 Version. Is it easy to oscillate from internal oscillator first and then to osci ...

Hello, Ttelmah.

Thanks for your reply.

The version of my C Compiler is: CCS PCD C Compiler, Version 4.130

It doesn't work for me. I don't know if the reason is the properly version, but i ad ...

Hello everyone...

I have a problem with this microcontroller. I want to make a simple program with an external oscillator using a crystal. I made firstly a program with internal oscillator at 8 MHz ...

Thanks a lot...

The program worked. I tried in the kitchen and the frequency is 8843Hz, so it has about 50% humidity according to the htf 3223 datasheet. The outside humidity according to the weath ...

I 've changed the default example from CCS, so i can use my microcontroller. It is strange, but i don't know either many things about interrupts and that makes it more difficult to me.

So, first i have to enable GLOBAL interrupts and then interrupts in CCP1, right??? But it didn't work again. My sensor has only one pin for the frequency. So, i connect only this pin to CCP1. Have i t ...