Search found 44 matches

I used PIC12f1840 in my project.

How do i use setup_wdt() to setup expired time. It looks it only work with setup_wdt(WDT_ON). It doesn't work with setup_wdt(WDT_TIMES_1024) or setup_wdt(WDT_2304MS ...

Is that possible to start a transmitting interrupts in a timer interrupt for sending out data once in certain time period.

#int_timer1
void time1_isr()
{
set_timer1(0xbf5); ...

No I didn't do that because the hardware pins set should be pin_a4 is TX and pin_a5 is RX.

I add some code to my program and now it works with #int_ and #int_tbe

#bit RXDTSEL=APFCON.7//if =1 pi ...

Thanks Ttelmah.

It looks it 's not in this case.
I put there whatever it is

#pin_selects tx=pin_a4
#pin_selects rx=pin_a5
or

#pin_selects tx1=pin_a4
#pin_selects rx1=pin_a5
or

#pin_s ...

Hi Ttelmah, I tried EX_STISR.c

Please see below:

#include <12F1840.h>

#fuses INTRC_IO
#use delay(internal=4M)
#use rs232(baud=9600, xmit=pin_a4,rcv=pin_a5)

#define ...

I use 4 MHz INTRC working under baud 9600

#fuses INTRC_IO
#use delay(internal=4M)
#use 232(baud=9600,xmit=pin_a4,rcv=pin_a5)

#byte RCSTA=0x19D
#byte TXSTA=0x19e
#bit TXIE=0x ...

Hi

I want to use 'break' jump out of loops. The code in below.

while(condition1)
{
while(condition2)
{
while(condition3)
{
...

Hi

I want to output floating number like x=0.0176,
how can i make it?\

if i use
printf("x=%f",x);

it is going to output x=0.17 other then 0.0176

what should i do if i want get ...

I used dspic33fj32mc, ccs compiler 4.118
The code is like this,

#use delay(clock=8M)
#pin_select SDI1=pin_b3
#pin_select SDO1=pin_c1
#pin_select SCK1OUT=pin_c2
#use spi(spi1,mast ...

yes. you are right. but actually in my program file there isn't this ";" , it is a mistake when i post in here.
So the problem is still there. Please give me a help!

I use 33fj128MC804, I met a problem here.
Please see the code below.

struct rp
{
int8 lowByte;
int8 upperByte;
};
struct rp rp1;
#word rp1=0x06a4;
rp1.lowByte=0x17;//<----- ...

Thanks JDS-PIC

Thanks you guys.

According your guys analysis, I try so many way to find out what is going on there. Finally I make a 1 second led flash program as Ttelmah said. I found it was 1.07 seconds other ...

Thanks for your response.
I did some changes:

#use rs232(baud=9600,xmit=pin_f5,rcv=pin_f4,bits=8,stop=1,parity=n)
unsigned int8 i=0;
for(i=0;i<5;i++)
{

printf&# ...

I used dsPIC33F want to print out:

0 CrLf
1 CrLf
2 CrLf
3 CrLf
4 CrLf
A CrLf

The program like this

for(i=0;i<5;i++)
{
printf("%2x",i);
printf(& ...