Search found 14 matches

Thanks Gabriel for the instant reply, I wrote the code as follows
char *p;
p= strchr(Receive_String,'H');
if ((p+1)==strchr(Receive_String,'O')||(p+2)==strchr&# ...

Thanks for the code, I have tested it with hyper terminal instead of LCD and sim900 modem with a speed of it's default 9600 baud rate. It's working fine and I have to modify. My question is how can I ...

Thanks everyone. It's working fine @ 20Mhz with some minor modifications.
Through trial and error I found some values matching.
//******************************************************************* ...

Thanks for the reply. First of all I am sorry to say that I don't have an oscilloscope :(
I tested the timings in MBLAB simulator/stopwatch and it's perfect but don't know what's happening in real wo ...

Hi cotestatnt, Thanks for the code.
The code is working fine with 876A@10Mhz.
But when I tried to do @20MHz it's not identifying the device.
I tried with several crystals, and it's almost OK up to ...

Thanks for the comments,
Not sure what you mean by 'communication up on request',

I meant, The Master PIC sends a request to slave (Pull up or Pull down the bus) and while getting request, Slave ...

hi there,
How can I find out a 16bit data repeating more time out of 500 samples?
Language = CCSC or Assambly

In other words, How can I find out repeated number from an array of 500 elements. (16 ...

Thanks for All comments,
Actually I need one way communication up on request (interrupt driven) from Master. I didn't notice the example file in ccsc. EX_PBUSM.C. Let me study it and I hope it can so ...

Hi there,
I need to transfer data from one pic to another with one wire. (RC1 is the only port available in master PIC) Is there any protocol available in ccsc?
Your valuable suggestions are appreci ...

Thankyou, now I can draw the track with rts /cts.
I always used to do the PCB first Smile

Thanks for all the replies,
Actually I am intending to buy a thermal printer connectable to a serial port. I know that I have to study commands for the specific printer.
I don't need graphics, just ...

what 'POS serial Printer' are you using....?

thanks
arunb
I think all serial printers are interfacing in a common method. Correct me if I am wrong, thankyou

This is probably the wrong place to look for somebody to do your design and coding for you though.

Expend some effort on both the hardware and software front - and I'm sure folks will chime in ...

Hi friends,
How can I interface a POS serial Printer to Microcontroller? Do I need a max232? what connections of a serial port necessory to print? I need a circuit diagram. Thanks in Advance.