Search found 19 matches

Hello Mr. T:

First I have to excuse myself, I had to work on other projects, so I left this somewhat abandoned... I have time now, so I'll get back to it.

I noticed you put a lot of effort in th ...

Thanks newguy, I will try your suggestion and comment how it went down.

Best regards,
Fernando.

Hello everyone:

I need to talk to a device (send and receive data) which has an synchronous serial port; the device acts as a DTE, and expects the DCE (modem) to provide both TX and RX clocks. The ...

Hi:

I was wondering if CCS supports the use of the built-in crypto engine in PIC24 devices, for example the PIC24FJ128GB204 family, which handles AES and 3DES algorithms in several modes of operati ...

Hi PCM programmer:

I implemented your suggestions and it worked like a charm! I can't thank you enough, as this will help me greatly in my project. This forum is very useful thanks to people like y ...

Hi Jay:

I might get away with using one of the UARTS for this, but as the SPI port was available, i thought "why not?"... i believed using SSP interrupt for this would be similar to using ...

Hi:

I posted a few days ago regarding storing a variable in EEPROM based on reading external interrupts; taking some advice from this forum, i got it to work! Now, i have to send this settings to a ...

Quick update:

It seems that with your help i managed to sort this problem out! Basically, i used temtronic's suggestion, of a counter that checks if the pin is still low after 3 timer interrupts; i ...

Thanks for your answers guys! I'll try your suggestions on Monday and let you know about the results.

Best regards,
Fernando

@PCM Programmer: Yes, i have 10 k pullups in both pins; i'm trying to port a working code running in a 18f252 to the 18f26k22, and the second usart will be used for management; i"m just discoveri ...

Hi:

I'm having trouble with something seemingly simple, but which has me scratching my head. I'm working on a serial comm device, which has 2 modes of operation and works at 1200, 2400 and 4800 bp ...

Thanks!

I'll guess i'll try and find some 10 MHz xtals then.

Best regards,
Fernando

Hi:

I've been working with the 18F252 for a while, always using a 20 MHz crystal. Now i need to speed up some routines, and besides improving the code, i want to use a higher clock. The manual stat ...

Hi. I don't know the details, as i used a integrated card. But there's a lot of info about it on the manufacturer's website: www.dvsinc.com

�In any case, there's a chip that makes the same voice co ...

Thanks for your help, Ttelmah. It seems my numbers weren't quite right... i'll remove the kbhit and add the "errors" to the rs232 declaration.

I did a little experiment: a 16F628A in a l ...