Search found 47 matches

Ok I am having on of those days and this could be the fastest ever answer

while(1)
{
answer=0;
if(kbhit()) //if keyboard is hit
{
c = getc( ...

Hi guys, wondered if we coudl discuss the most elegant method of taking a signal average

I have a PIC18F452 and I am using a port into a DAC to put out an anolog voltage. I have a fairly noisy AI a ...

Ok I have been bloody silly I have built and programmed some harware using a 18F8621 (and PCH) and because I hadn't thought about what happens to the circuit when nothing is happening, I put the matri ...

Thanks for the reply PCM programmer. Sorry should of kept this a bit more simple instead of baffling everyone Embarassed

The Tx and Rx is not reversed just a typo on my part from now on will move the ...

I have built some electronics using an 18F8621 and a 4x3 keyboard

when I use the following test script it works a treat

kbdTest.c

#include <18F8621.h>
#device *=16 ADC=8

#define ...

Transmitter Code: // INCLUDE FILES
#include <18F8621.h>
#device *=16 ADC=8
#include <STRING.H>
#include <STDIO.H>
#include <STDLIB.H>
#define Fosc 40000000 ...

Thought I would change the title to make it more appropriate

Guys, thanks, I really appreciate everything you have done, the code works perfectly and I can transmit on one device and recieve on the ...

your a bloody good 'un. Let me try that tomorrow and will come back

Thanks newguy!!!!!!!!!!!

So I have worked on my code and I have limited sucess using the code below I now get some of the data (Tx sends 'Dave Rocks') and some garbage. Included is a capture of some of the output

> CO ...

Hi there, I have searched the forum and although there have been lots of similar questions no one has actually ever posted the answer so I will atempt to make sure this thread is seen to its conclusio ...

Roughly how fast could I write a byte of data form a PIC to say an MMC via SPI.

Is SPI the fastest method

I am purely at a initial stage of designing a project and it requires storing data FAS ...

boys, due to all your help I have got some code that is absolutely flying along Want to say a massive thanks to all of you!!!!! I have only had a quick check on the code but it appears to be working ...

Thanks ckielstra

just to confirm in the code you wrote previously

#BIT TMR2IF=0x0F9E.1
int8 delay_in_us = 10; // Execute loop every 10us
void main()
{
setupMain(); ...

clear_interrupt(INT_TIMER2);

How do I implement this as it is not a function asI only have PCH v3.180.

I should probably sort it out and buy the upgrade!!

if(valueOfE != oldValueOfE || valueOfF != oldValueOfF && i < 700)
if(valueOfE != oldValueOfE && i < 700)

Sorry ckielstra normally comment one of th ...