Search found 23 matches

Thank GAWD, I was hoping it was me doing something stupid, (ususally is).

I went back and forth so many times with intrc and intrc_io trying to get int internal osc working that somewhere I got th ...

From the .LST file.
Configuration Fuses:
Word 1: C900 INTRC FCMEN IESO
Word 2: 150E BROWNOUT WDT BORV20 PUT WDT1024
Word 3: 8000 MCLR
Word 4: 0081 STVREN NODEBUG NOLVP
...

I will redo a smaller sleep only program and see what that does. I read about the dual speed startup. But since I am already using the internal RC I thought that it would not be a problem. I am not wo ...

Greetings,
I seem to remember seeing something written about where the WDT re-enters the code exectution after a wakeup.
If I turn on the WDT, use a sleep() function and have the WDT bring the chip ...

I thought this might be the case. I have thought about aditional logic in the circuit but I already am crammed for space. I think the easiest solution is to have the control system always do a double ...

hmmm. I don't see my reply posted. I will try again.
I thought I answered your question by saying I was using an 18F1220. I now realise you wanted to know what the 18f1220 is connecting to. whooops. ...

I am using the 18F1220 device.
I have read through that technique. I may be wrong, but it looks to me like this won't set all of the pins at the same time like setting an output port would. They will ...

Due to pin restrictions I need to output logic levels for 8 pins equal to a variable on separate ports.

Is there a way to set the all eight pins at the same time? I can easily test the bits in my ...

For anyone else who read this and was as stumped as I was. I read in APP192 page 11, about reading ROM. Over and Over I read that everthing is basically a write, then read results. I was getting the r ...

I am trying to talk between these two devices with a pic. I have the communication working between all three chips. The problem is that I can't seem to read any of the registers in the ds2408 chip. Ex ...

Yes I have a DS2408.
I think I have my clock issues figured out.
Now I think I have a new problem. Do I need a reset pulse with the DS2480? I know the one wire has a reset pulse but won't the DS2480 ...

Thank you both for your respnse. Yes the code was a little messed up by me playing around trying to look at variables during code execution. I was trying to make sure where the TRUE/FALSE was comming ...

I have read data sheets. I have searched and read all pertinent posts for 1-wire. I sort of have a grasp on things but I am finally putting my pride aside and am asking for help. I am attempting a sim ...

Does the 0-255 number give you direction as well as speed?
Assuming both chips have harware uart, why not use serial? I have done this with two pics myself. One master and one slave. The slave drive ...

Thanks much for your help. I have found that the debugger will give me slightly different mcu speed reading when connected in different circuits. i.e. my demo board shows it runs at 8MHz, where my act ...