Search found 22 matches

ok! I have tried it and it works! thank you so much.

ok! thank you very much!

#include <12F675.h>
#device *= 16
#fuses NOWDT, PROTECT, CPD, NOMCLR, INTRC_IO, BROWNOUT, PUT
#use delay (internal = 4MHz)

#byte GPIO = 0x00

#include "lcd.c" ...

So, I shouldn't use enable_interrupts(global)?

Hello everybody! I don't know what happened with my code but when I simulate it, variables don't increment. Could someone say me the reason please?
lcd_I2c.c
#include <12F675.h>
#device *= 16 ...

Ok! Thank you very much. About the LCD, I've used an expander PCF8574 and it works fine. I can display date and hour information on it. My only problem was the interruption. Now, I am going to try it. ...

so, I can't use any interruption with GP3? can I have external interrupt with GP0?

Could you explain it more please? I have tried it and get an error! maybe I don't realy understand what you mean! I use PIC12F675 and I have use an interruption with GP2, and now, I need some interrup ...

Thanks a lot! I will try it.

Hello PCM programmer! At last, I can finally do it! Razz

I used the pin GP2 interrupt to configure the digital clock!
this is my code!
I2C_LCD.c
#include <12F675.h>
#device *= 16
#fuses ...

Hello PCM programmer! I want to give you thanks for the several helps you've give for me!
At the beginning, I used the code that I've found here but I had got some problems with the PIC12F's ROM and ...

thank you PCM programmer. I have tried the code and it works! But could tell me why the seconds takes a long time to increments when I simulate it with proteus? this is my code:
I2C_LCD.c
#include ...

I have done what you suggest me to do:
I2C_LCD.c
#include <12F675.h>
#device *= 16
#fuses NOWDT, PROTECT, CPD, NOMCLR, INTRC_IO, BROWNOUT, PUT
#use delay (internal = 4MHz)

#inclu ...