Search found 50 matches

Hi,
I have a project with PIC24HJ128GP202 and I have some doubts about FUSES and setup_oscillator.

I want the PIC to run at 40MIPS from internal oscillator and datasheet says that the basic frequ ...

Hi all,
I solved the problem.
The thing is that I was including all the files in the project. As CCS answered me, I have to add the statment #include "abc.c" as a driver file in the main f ...

I updated to MPLAB 8.20 and CCS 4.085 but no way I can compile the files. I tought it could be Windows Vista but even with XP I cannot compile anything.
I am becoming upset with this problem :(

Th ...

The way you write it, I can compile the code. But the problem is when I separate the code into multiple files, such as init.h init.c and so on.
My project will increase in size so I really would like ...

I included the #device statement but the error is still there. The compiler says the error is in the init.h file ! Now files are like these:

#include <24HJ128GP202.h>
#device ADC=10
#fus ...

Hi, I'm using PIC24HJ128GP202, MPLAB 8.14 and CCS 4.084

I am new to 16bit MCU, but I have good knowledge of 8bits MCU and CCS compiler.

Since, PIC24 is a 16 bit compiler and from the datasheets, ...

MPLAB 8.10 / CCS 3.223 / PIC16F913

Hi I have a PIC 16F913 with 32kHz crystal. I want the timer1 to be interrupted every 250ms to verify PIN status and count 4ticks to make 1second. If I set the ti ...

PIC18LF2550 - MPLAB 8.10 CCS4.082

Hi, I can exchange data with the computer (hyperterminal) as CDC device but suddenly PIC stops working. It is powered but it seams to crash. I think the connection ...

MPLAB 8.10 + CCS3.223 + PIC16F913

Hi, I am trying to read/write data from the internal eeprom of the PIC but I have no success. I cannot read or write anything. But if I initialize data with #rom d ...

Hi,
I am using PIC16F913 as a LCD driver, with 3 commons and 15 segments. Some segments are working fine and I can see them on the LCD, but others are not working. Watching the oscilloscope, I notice ...

Hi all,
I am using PIC18F87J50 at 3.3V
When you say that digital pins are 5V tolerant are UART/I2C/SPI pins included ?
If so, I can connect MCU at 3.6V to a I2C peripheral working at 5V, correct ? ...

MPLAB 7.41 CCS 4.005 PIC18F2550
Hi all,
I am just trying to compare a string to a constant but I am receiving 2 compiler errors:
1) attempt to create a pointer to a constant
2) a numeric expressio ...

Hi All,
MPLAB 7.41 CCS 4.005
PIC18F2550

I am trying to read a character from the UART (RS232 with MAX232) that comes from my equipo and send it to the USB. USB is working fine and data is reachin ...

Hi,

I have faced some problems with multiple devices in the I2C bus (1 MCU + 1 I/O expander + 1 LCD driver). It worked fine with 1 device but not 2. Try removing the FORCE_HW from the #use I2C stat ...

Hi,

I have faced some problems with multiple devices in the I2C bus (1 MCU + 1 I/O expander + 1 LCD driver). It worked fine with 1 device but not 2. Try removing the FORCE_HW from the #use I2C stat ...