Search found 13 matches

Now it work Smile

Thank you very much!

Now interval is ~12 sec, PLL still not working.

C code:

#include "18F65J50.h"
#FUSES H4_SW
#FUSES NOWDT
#use delay(clock=48M) ...

My compiler version is 4.084. I reduced code to this:

#include "18F65J50.h"

#FUSES H4_SW
#FUSES NOCPUDIV
#FUSES PLL1
# ...

Hi guys,
I am trying to make PC <> PIC communication with 18F65j50, but I can't set right frequency - 48MHz. The crystal wich is connected between RA6 and RA7 is 4MHZ. This is my code:

#incl ...

The problem was here:
set_adc_channel(AN0); is not correct, correct is set_adc_channel(0);
10X Very Happy

Hi guys,
I am trying to do ADC with this microcontroller: 18F2525 and my code:

#include <18F2525.h>
#device adc=10

#FUSES NOWDT //No Watch Dog Timer
#FUSES WDT128 ...

I changed my PIC with 12F629 and now consumption is lower than 0.6ma Smile

Thanks everybody again!

p.s.I reduced the voltage from 5V to 3.3V,which also had a significant impact Smile

I rewrote the program

#include <12F675.h>
#device adc=8

#FUSES NOWDT
#FUSES INTRC_IO
#FUSES NOCPD
#FUSES NOPROTECT ...

Hi,
I have a problem with this microcontroller 12f675. I think there is an unusually high consumption - 7.5ma. In datasheet is wrote 1.4ma at 5V and 4MHZ. This is my program:

#include <12F675.h ...

It's work

p.s.The problem was in LCD in my scheme.It's not displayed correctly.

Hi boys,
I have problem with the simulation of DS18S20 on proteus V7.5 SP3. Have you ever used a simulation of ds18s20? I use PIC C compiler 4.084.
Thanks Smile

Hi,
I have a problem with configuration of UART on pic16f88. This is my code:

#include <16F88.h>
#device adc=8

#FUSES NOWDT //No Watch Dog Timer
#FUSES XT ...

hi guys,
I use PIC-C compiler version 4.074. I want to make PIN_A0, PIN_A2 as input and PIN_A1 as output. To enable PULLUPS resistor of PIN_A0, PIN_A2, I wrote this :

#include "D:\Dimer ...