Search found 13 matches

Hi! I did a simple program using arrays This will be the base of a more complex one.

I’m using 2D arrays and passing them as parameters into a function.

If the variables (arrays) are declared ...

Hi everybody!

I´m trying to do a very simple program using floating data.
The program only has to save the data of one array into another variable and return.
Obviously, this is just a test prog ...

PCM programmer, than you for your time to reply my message! Very Happy

Actually I had already read this file that you kindly addressed to, but I didn't find what I was looking for.
and those documen ...

Hello.
I´m using the dspic30f3012 configured to use the Fast RC oscillator and the 16 PLL. Everything works fine but...

I´m trying to figure out what is the "ADC internal clock"
I kno ...

Hi Wayne_
Yes, I´m using Hardware SPI routines. The code I posted above is not the code I´m writing now that I want to save the data in raw mode. As you well appointed, I´m saving the data as a 16 ...

Hi CoverUp
Solved!!

if any one want the solution, post but i'll explain it in spanish. sorry for that

Por favor comparte tu solución. Aunque sea en español. :-)

Please, share the solution ...

Hi Wayne_

Actually, my requirements are not so high like in your project.
I just need, for now, 1KHz. It's a very low frequency compared with your (44KHz)?.

In fact, now I'm doing the same as y ...

Well I want to thank all of you who reply my message.
Finally I got successful readings and recordings.

Below is the code in case somebody wants to implement it. Unfortunately for me, the time c ...

Hi everyone, thank you for your time and advices.

Wayne_ I implemented the solution that you propose.
The compiler does not complain, and apparently the program is saving the data, at least the da ...

Thank you Wayne_ and Ttelmah for your hints and quickly reply. Very Happy

I think I should explain a litle more about what I´m aiming to do.
My goal is to make a data logger which should read data f ...

Hi!

I'm trying to make an array of 512 bytes. The array must contains the result of several ADC conversions, enough to fill the 512 bytes array.
The data of the array must be in ascii code.
So, ...

Ttelmah and LostInSpace, thank you so much for your time and help!
You are right, the .LST file and the configuration bits window in MPLAB
both shows the change according to the settings in the com ...

Hello to everybody.
I´m trying to implement a simple flashing LED program using the dsPIC30F3012 and the compiler is the PCWHD ver. 4.102.
The LED flashing according to the time I set but the dsPIC ...