Search found 152 matches

Hi there.

After suffering a lot trying to use CUBE IDE and STM32F411CEU6, I decided that these new IDE are all trash..... So, I searched for a new PIC device with more memory so I could rewrite my ...

Thanks Ttelmah

I will give it a try.

Regards.

Thanks, You mean first of all instructions, send a I2C_atasrt() and I2C stop()? This issue really gets me odd; I can’t have any clue of what is going wrong, made a lot of tests and nothing seems to ...

Hi temtronic. Don't know why, there is no way to read DS3231 with accuracy time after a power shutt down. Always comes with two or more minuts off.
The battery is ok, with 3V, nothing seems to solve ...

Hum...... Will be that the reason off all problems? Because I was simple running at the wrong clock frequency speed, and the errors I got was totally “random” with no logical explanation.
Thaks f ...

Well, I take off all NULL terminator insertion in the GSM_PASS string, but not sure this was the problerm, so I make this: (Call it BRUTE FORCE)
for(D1=0;D1<100;D1++) //DETECT PASSWORD - ...

Ttelmah, thanks. I will do that. But when I change GSM_PASS on the go, so I have to write '\0' to the last position or not?

Another issue is that when I use the FUSES as this:
#fuses INTRC, NOWDT, ...

Well, thanks for helping me, Ttelmah.
I fill the GSM_PASS this way:
void MAIN()
{
SETUP_ADC_PORTS(NO_ANALOGS);
SETUP_COMPARATOR(NC_NC_NC_NC);
SETUP_COUNTERS ...

Hi, I am finalizing a program to read and control a SIM800 module, but strstr function seems to not work properly in a specific location of the routine. This is how I declare variables and buffers.
...

I love I2C, but I am studding the USART, it is pretty easy, but it has some differences. No problem.
Thanks!

@temtronic, not really! The "SIM800L module" here works pretty well at 5V, no issues about that.

@Ttelmah that's is the case, we never know the length of the message. Regardless of I2C, ...

So, I need to do the delimiters count, lets say, in the SIM800L there are three 0x0D and three 0X0A for each SMS received, and this is the only way I can say that the USART finished receiving?.
...

Hi there,

Is there a way to detect if the UART received an end of transmission?

Regards

I Found it!

#USE CAPTURE(INPUT=PIN_C6,CAPTURE_RISING,TIMER=1,FASTEST)

Thanks anyway!

Hi,

Need help to configure CCP3 on PIN_C6

How do I do that?

Regards,