Search found 78 matches

You just want a continious loop for this? why are you not using

delay_ms(1000); //delay for 1 ms.

and

output_high( PIN_E1);// high PIN_E1

commands to do the job? It is far less complicat ...

Guys,

I am trying to use hyperterminal's winsock to send binary data to a PIC based webserver (18F4680). But the problem is that the binary data is encoded with the Shift-JIS format ( when hyperter ...

My apologies for that. It should have been like "Gents/Ladies". Smile

Thanks PCM, much appreciated Smile

Fellow Gents,

I wanted to know how to use fputc() to display binary values, instead of displaying characters.

Would appreciate your thoughts on this.

Cheers

Tranz

Well based on your loop

#use rs232(baud=9600,parity=N,xmit=PIN_B0,rcv=PIN_B1,bits=8,stream=COM0)
#use rs232(baud=9600,parity=N,xmit=PIN_B2,rcv=PIN_B3,bits=8,stream=COM1)
#use rs232(baud=9600 ...

Yes, certainly seems like that now. But the thing is that the micro is acting like a TCP/IP webserver and a client computer sends the data via hyperterminal based TCP/IP winsock.
All the micro is doi ...

Well with CCS you can put hardware and software interrupts on those pins and loop the software interrupts. So when the data comes in from any of those 3 terminals your micro would be able to handle th ...

Yes with this test the PIC is displaying the data correctly. 0xFF is being displayed as FF.

Well I am sending a stream of binary data, and the only part the PIC plays is to transfer the data which it receives over Ethernet. So there are no conditions on what the PIC is supposed to display wh ...

//settings

#use rs232(baud=9600, xmit=PIN_C6,rcv=PIN_C7, STREAM=USER,parity=N,stop=1)

//the part of the code where in the data is sent from the TCP client to the //PIC and then the PIC ...

Gents,

The TX and RX lines are switched around on the PIC.

Here are the results of the tests carried out as suggested by PCM.

Yes there is a difference when the micro sends the data over RS2 ...

Hey Guys ,

I have an interesting problem with the RS232 terminal.

I am trying to send data via RS232 to a DSP controller. Now when I send the data through the computer at 9600 baud, the data is ...

I know fgets would be the best solution for this problem, but when I put it with a stream its showing compiling errors.

void ui_handle(void)
{
char c[30];
char h; ...

Thanks PCM !

But if I want to create a response from the micro (18F4620) based on a sentence given by the user, how would I get to do it.

Like if I would like to give a response for

"Wo ...