| View previous topic :: View next topic |
| Author |
Message |
dyeatman
Joined: 06 Sep 2003
Posts: 1934
Location: Norman, OK
|
|
 Posted: Thu Nov 27, 2014 4:34 pm |
 |
|
Glad to hear it... You are welcome.
_________________
Google and Forum Search are some of your best tools!!!! |
|
 |
sahu77
Joined: 08 Sep 2011
Posts: 202
|
|
| Posted: Fri Nov 28, 2014 1:11 pm |
|
|
now i want to display adc value on lcd. those code as
| Code: | set_adc_channel(1);
delay_us(10); //-------->NOTE:AQUISITION TIME NECCESARY
battvolt=read_adc(); //reading current
delay_us(10);
battvolt= (float)(battvolt * 5)/1023.0;
lcd_gotoxy(1,1);
printf ( LCD_PutC,"Battery:\f%3.2f", battvolt);
lcd_gotoxy(12,1);
printf(LCD_PutC," VOLT \n"); |
found error as | Quote: | | Printf format type is invalid |
_________________
sahu |
|
|
Ttelmah
Joined: 11 Mar 2010
Posts: 19538
|
|
| Posted: Fri Nov 28, 2014 2:57 pm |
|
|
| Battvolt is declared as something other than a float. |
|
|
sahu77
Joined: 08 Sep 2011
Posts: 202
|
|
| Posted: Fri Nov 28, 2014 3:45 pm |
|
|
| Ttelmah wrote: | | Battvolt is declared as something other than a float. |
%3.2f is show only float only?
_________________
sahu |
|
|
Ttelmah
Joined: 11 Mar 2010
Posts: 19538
|
|
| Posted: Sat Nov 29, 2014 1:27 am |
|
|
Yes.
This is standard C. Look in the manual for printf. |
|
|
sahu77
Joined: 08 Sep 2011
Posts: 202
|
|
| Posted: Sat Nov 29, 2014 6:51 am |
|
|
| Quote: |
This is standard C. Look in the manual for printf. |
battvolt is declared as int32 battvolt . so how can printf it ?
_________________
sahu
Last edited by sahu77 on Sat Nov 29, 2014 7:30 am; edited 1 time in total |
|
|
sahu77
Joined: 08 Sep 2011
Posts: 202
|
|
| Posted: Sat Nov 29, 2014 7:05 am |
|
|
| Ttelmah wrote: | Yes.
This is standard C. Look in the manual for printf. |
battvolt is declared as int32 battvolt . so how can printf it ?
_________________
sahu |
|
|
Ttelmah
Joined: 11 Mar 2010
Posts: 19538
|
|
| Posted: Sat Nov 29, 2014 9:02 am |
|
|
%Ld
However it won't have any decimals since it is an integer number.
Use:
| Code: |
battvolt=read_adc(); //reading current
battvolt= (battvolt * 500)/1024;
lcd_gotoxy(1,1);
printf ( LCD_PutC,"Battery:\f%5.2LW", battvolt);
|
This prints an integer, as a scaled value (/100 here). So the integer is made 100* larger in the earlier calculation.
Read the threads for why the correct divisor is 1024, _not_ 1023. |
|
|
sahu77
Joined: 08 Sep 2011
Posts: 202
|
|
| Posted: Sat Nov 29, 2014 9:09 am |
|
|
| Ttelmah wrote: | %Ld
However it won't have any decimals since it is an integer number.
Use:
| Code: |
battvolt=read_adc(); //reading current
battvolt= (battvolt * 500)/1024;
lcd_gotoxy(1,1);
printf ( LCD_PutC,"Battery:\f%5.2LW", battvolt);
|
This prints an integer, as a scaled value (/100 here). So the integer is made 100* larger in the earlier calculation.
Read the threads for why the correct divisor is 1024, _not_ 1023. |
can u explain me 5.2 LW ?
_________________
sahu |
|
|
Ttelmah
Joined: 11 Mar 2010
Posts: 19538
|
|
| Posted: Sat Nov 29, 2014 9:18 am |
|
|
Read the manual....
It is a printf specifier to print an integer as a 'scaled' value.
The .2, specifies how far it is to be scaled.
So the integer '100', printed with 5.2w, prints as '1.00'. Scaled by two places.
The 'L' says that the number is a _long_ integer (bigger than int8). |
|
|
|
FAQ 
Search
Register
Profile 
Log in to check your private messages 
Log in
