CCS C Software and Maintenance Offers
FAQFAQ   FAQForum Help   FAQOfficial CCS Support   SearchSearch  RegisterRegister 

ProfileProfile   Log in to check your private messagesLog in to check your private messages   Log inLog in 

CCS does not monitor this forum on a regular basis.

Please do not post bug reports on this forum. Send them to CCS Technical Support
ICD-s software corrupts MPLAB?

 
Post new topic   Reply to topic    CCS Forum Index -> General CCS C Discussion
View previous topic :: View next topic  
Author Message
Dem
Guest
ICD-s software corrupts MPLAB?
PostPosted: Mon Dec 20, 2004 4:23 am     Reply with quote
I found that installing ICD-S s/w corrupts MPLAB 6.xx or 7.xx - it stops importing .HEX files into the memory, probably due to registry changes for .hex extention. When I perform in MPLAB File->Import , I get the message "The format of the file xxxxx.hex can not be read or written because it extention was not recignized." - it happens after every ICD-S s/w update. MPLAB reinstalling solves the problem, but maybe someone has more elegant solution ?
PCM programmer



Joined: 06 Sep 2003
Posts: 21708

View user's profile Send private message

PostPosted: Mon Dec 20, 2004 12:23 pm     Reply with quote
See this post on the Microchip forum:
http://forum.microchip.com/tm.asp?m=52903&mpage=1&key=extension%2Crecognized&anchor#52995
Display posts from previous:   
Post new topic   Reply to topic    CCS Forum Index -> General CCS C Discussion All times are GMT - 6 Hours
Page 1 of 1

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum


Powered by phpBB © 2001, 2005 phpBB Group