RS232_ERRORS

Barney · Joined: 18 Oct 2004 Posts: 41 Location: Newark, CA

Can anyone point me to the documentation for the built in variables, in particular RS232_ERRORS? I searched the Forum, FAQ, Manual, .LST, and .H files and found bits & pieces, but nothing complete.

Thanks

PCM programmer · Joined: 06 Sep 2003 Posts: 21708

It's explained in the manual and the Help file.
However, CCS has written the explanation in short hand,
and it may be difficult to interpret. So I've re-written it below:

Explanation of the RS232_ERRORS variable:

When the hardware UART is specified by #use rs232():
� RS232_ERRORS is used only by the getc() function.
� RS232_ERRORS is a copy of the RCSTA register except
that Bit 0 is used to indicate a parity error.