CCS C Software and Maintenance Offers
FAQFAQ   FAQForum Help   FAQOfficial CCS Support   SearchSearch  RegisterRegister 

ProfileProfile   Log in to check your private messagesLog in to check your private messages   Log inLog in 

CCS does not monitor this forum on a regular basis.

Please do not post bug reports on this forum. Send them to CCS Technical Support
problems with timer 0

 
Post new topic   Reply to topic    CCS Forum Index -> General CCS C Discussion
View previous topic :: View next topic  
Author Message
andreluizeng



Joined: 04 Apr 2006
Posts: 117
Location: Brasil

View user's profile Send private message Send e-mail MSN Messenger

problems with timer 0
PostPosted: Sat May 06, 2006 3:53 pm     Reply with quote
Hi people,

some few days ago and just now i solved the problem.. i was using a routine to adjust a real time clock (programmed by software) and everytime that this routine was called... the software just lost the pre-sets configurations of timer0 or another timer..

i solved that just put setup_timer_0 () function at end of my routine...

why does it happen ?

there�s nothing else in that routine but change the value of some global variables.
_________________
Andre
Display posts from previous:   
Post new topic   Reply to topic    CCS Forum Index -> General CCS C Discussion All times are GMT - 6 Hours
Page 1 of 1

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum


Powered by phpBB © 2001, 2005 phpBB Group