CCS C Software and Maintenance Offers
FAQFAQ   FAQForum Help   FAQOfficial CCS Support   SearchSearch  RegisterRegister 

ProfileProfile   Log in to check your private messagesLog in to check your private messages   Log inLog in 

CCS does not monitor this forum on a regular basis.

Please do not post bug reports on this forum. Send them to CCS Technical Support
16F690 PWM

 
Post new topic   Reply to topic    CCS Forum Index -> General CCS C Discussion
View previous topic :: View next topic  
Author Message
hippy2007



Joined: 17 May 2007
Posts: 1

View user's profile Send private message

16F690 PWM
PostPosted: Thu May 17, 2007 10:46 pm     Reply with quote
Hi,

I am currently designing a thermal and fan controller but I kind of made a mistake in my PCB. I've connected the wrong PIN to my FET. I connected RC3 instead of RC5. I could resolve this by cutting the track and solder a wire but I was wondering if there is another solution to create a PWM via RC3.

Any help will be useful.

Paul
PCM programmer



Joined: 06 Sep 2003
Posts: 21708

View user's profile Send private message

PostPosted: Thu May 17, 2007 11:24 pm     Reply with quote
You can probably fix it with the Pulse Steering capability of the 16F690.
But what's your compiler version ? Not all versions have the pulse
steering constants in the .H file.
Display posts from previous:   
Post new topic   Reply to topic    CCS Forum Index -> General CCS C Discussion All times are GMT - 6 Hours
Page 1 of 1

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum


Powered by phpBB © 2001, 2005 phpBB Group