View previous topic :: View next topic |
Author |
Message |
jetpr
Joined: 05 Oct 2007 Posts: 2 Location: Puerto Rico
|
Help |
Posted: Fri Oct 05, 2007 3:55 pm |
|
|
Hello to all i start a project for micro Turbines with pic18f252 using PicBasic Pro and the project is in 100% done but the code or the chip is not stable.
so i need help to change the Compiler or is the pic18f252 some time work and i re program and the no work.
some people seed the new pics are hard or bad and the old pics work but no
space for lot of code.
please help.
thanks _________________ my hobbies is PicMicro |
|
|
ELCouz
Joined: 18 Jul 2007 Posts: 427 Location: Montreal,Quebec
|
|
Posted: Fri Oct 05, 2007 4:18 pm |
|
|
sorry but i dont understand what is your question ?
you want us to port your PicBasic Pro code to CCS C? |
|
|
jetpr
Joined: 05 Oct 2007 Posts: 2 Location: Puerto Rico
|
|
Posted: Sat Oct 06, 2007 8:48 am |
|
|
not the question is that if some person to had this type of problem with by exemplary c or with the type of pic18f***.
but is the way to convert the PicBasic Pro to ccs c i wheel order the compiler
after i test the hex file of c.
_________________ my hobbies is PicMicro |
|
|
|