| View previous topic :: View next topic |
| Author |
Message |
Rafet32
Joined: 04 Jan 2006
Posts: 6
|
| Work MMC source Code & Simulation |
 Posted: Thu Jul 20, 2006 4:09 am |
 |
|
Merhaba
MMC ile ilgili denediğim �alışan bir uygulamayı sizlerle paylaşmak istedim. Ekteki dosyalarda kaynak kodları (CCS) ve Proteus 6.9 ile yapılmış sim�lasyon dosyası mevcuttur.
Faydalı olmak dileği ile....
Proteusda �izilmiş şematik devre
Proteusdaki devrenin �alışır hali
Source Code and SimulationFile Download |
|
 |
ckielstra
Joined: 18 Mar 2004
Posts: 3680
Location: The Netherlands
|
|
| Posted: Thu Jul 20, 2006 7:59 am |
|
|
| My Turkish is very poor. Is it possible you post an English translation as well? |
|
|
Rafet32
Joined: 04 Jan 2006
Posts: 6
|
|
| Posted: Thu Jul 20, 2006 12:50 pm |
|
|
Hi
Sorry. My english is very poor.
Above download link include tested source code and proteus simulation file. |
|
|
Guest
|
| Version? |
| Posted: Sat Jul 22, 2006 4:25 pm |
|
|
| Wich version of proteus have you used? Thanks! |
|
|
Rafet32
Joined: 04 Jan 2006
Posts: 6
|
| Re: Version? |
| Posted: Sun Jul 23, 2006 2:00 pm |
|
|
| Anonymous wrote: | | Wich version of proteus have you used? Thanks! |
Proteus 6.9 SP4 |
|
|
_erhan_
Guest
|
|
| Posted: Thu Aug 24, 2006 8:02 am |
|
|
IN ENGLISH : (images same as above) (Sorry i cannot post links or urls)
Hi,
I want to share a working circuit that i tested.
File given as attachement contains source codes(CCS) and Proteus 6.9 (SP4) simulation file.
I hope it will be helpful.
schematic:
| Code: | | img132.imageshack.us/img132/8716/proteusstopnu8.jpg |
Simulation running on proteus:
| Code: | | img80.imageshack.us/img80/8939/proteussimat9.jpg |
DOWNLOAD Source Code and Simulation File :
| Code: | | rapidshare.de/files/26386301/Forum_mmc.rar.html |
|
|
|
gedo
Joined: 03 Aug 2006
Posts: 1
|
| Hay ALLAH razı olsun |
| Posted: Sun Oct 01, 2006 9:29 am |
|
|
bende isite mi problem yazdığım kodlarda mı problem diye boğuşup duruyordum.
sayende isite problem olmadığını g�rd�m. şimdi tam gaz giderim. hemde kodlarından da faydalanırım. |
|
|
ldz2000
Joined: 25 Jan 2007
Posts: 1
|
| error! |
| Posted: Thu Jan 25, 2007 1:26 am |
|
|
| I Can't download "forum_mmc.rar"?? |
|
|
Rafet32
Joined: 04 Jan 2006
Posts: 6
|
|
| Posted: Sat Jan 27, 2007 3:12 pm |
|
|
| Quote: |
I Can't download "forum_mmc.rar"??
|
Send files your mail adress |
|
|
Andreas
Joined: 25 Oct 2004
Posts: 136
|
|
| Posted: Sun Jan 28, 2007 2:36 am |
|
|
Hello Rafet !
Looks very easy !!!
I am trying to run SD Cards on a 8720, but had some troubles in the past, so I am interested how You found the solution.
Please can You send me the sourcecode to my email address ?
[email protected]
Thank You very much
Andreas |
|
|
Rafet32
Joined: 04 Jan 2006
Posts: 6
|
|
|
prince
Guest
|
| erreur |
| Posted: Thu Feb 15, 2007 5:45 pm |
|
|
| Andreas wrote: | Hello Rafet !
Please can You send me the sourcecode to my email address ?
[email protected]
Thank You very much
|
|
|
|
asmallri
Joined: 12 Aug 2004
Posts: 1636
Location: Perth, Australia
|
|
| Posted: Thu Feb 15, 2007 7:12 pm |
|
|
The schematic has a (common) hardware design flaw. The DO output of the SD/MMC card at 3.3 volts is not compatible with the input specification of a 5 volt PIC SPI input in SPI mode. The SDO, SCK and CS require level conversion from 5volt to 3.3volts.
_________________
Regards, Andrew
http://www.brushelectronics.com/software
Home of Ethernet, SD card and Encrypted Serial Bootloaders for PICs!!
Last edited by asmallri on Fri Feb 16, 2007 9:05 pm; edited 1 time in total |
|
|
Rafet32
Joined: 04 Jan 2006
Posts: 6
|
|
| Posted: Fri Feb 16, 2007 3:56 pm |
|
|
Your right asmallri
Real hardware design, necessary 5V signal to reduce 3.3V. |
|
|
Mustafa
Guest
|
|
| Posted: Thu Feb 22, 2007 1:42 am |
|
|
Selam Rafet
rapidshare de linkler download edilemiyor. benimde mail adresime yollayabilirsen sevinirim.
[email protected]
şimdiden teşekk�rler. |
|
|
|
FAQ 
Search
Register
Profile 
Log in to check your private messages 
Log in
