| View previous topic :: View next topic |
| Author |
Message |
madhu
Guest
|
| 18f97j60 3v and rs232 5v |
 Posted: Sat Feb 06, 2010 12:55 am |
 |
|
Dar friends,
My hardware is PIC18f97j60 with 3.3v and rs232 with 5v supply whether it works or not. Please help me. |
|
 |
arunb
Joined: 08 Sep 2003
Posts: 492
Location: India
|
| re: |
| Posted: Sat Feb 06, 2010 1:43 am |
|
|
how is the voltage translation done, between 3.3 V to 5 V and vice-versa ??
thanks
arunb |
|
|
madhu
Guest
|
| 18f97j60 3v and rs232 5v |
| Posted: Sat Feb 06, 2010 2:22 am |
|
|
hi,
u mean it should be either 5V or 3.3V supply voltage for both. |
|
|
bkamen
Joined: 07 Jan 2004
Posts: 1615
Location: Central Illinois, USA
|
|
| Posted: Sat Feb 06, 2010 10:03 am |
|
|
why not use a 3.3volt capable rs232 interface IC like the MAX3232?
-Ben
_________________
Dazed and confused? I don't think so. Just "plain lost" will do. :D |
|
|
asmallri
Joined: 12 Aug 2004
Posts: 1636
Location: Perth, Australia
|
| Re: 18f97j60 3v and rs232 5v |
| Posted: Sat Feb 06, 2010 10:20 am |
|
|
| madhu wrote: | Dar friends,
My hardware is PIC18f97j60 with 3.3v and rs232 with 5v supply whether it works or not. Please help me. |
It will work but as already suggest, a 3.3V RS232 converter would be a better fit electrically between the PIC and the transceiver however a +5V RS232 would provide a better solution for RS232 because of the high signal level and therefore better signal to noise ratio.
_________________
Regards, Andrew
http://www.brushelectronics.com/software
Home of Ethernet, SD card and Encrypted Serial Bootloaders for PICs!! |
|
|
bkamen
Joined: 07 Jan 2004
Posts: 1615
Location: Central Illinois, USA
|
|
| Posted: Sat Feb 06, 2010 10:47 am |
|
|
huh??
The max3232 still puts out about 10V on the RS232 side running at 3.3 or 5.
_________________
Dazed and confused? I don't think so. Just "plain lost" will do. :D |
|
|
asmallri
Joined: 12 Aug 2004
Posts: 1636
Location: Perth, Australia
|
|
| Posted: Sun Feb 07, 2010 9:31 pm |
|
|
| bkamen wrote: | huh??
The max3232 still puts out about 10V on the RS232 side running at 3.3 or 5. |
Not on the test boards I have.
_________________
Regards, Andrew
http://www.brushelectronics.com/software
Home of Ethernet, SD card and Encrypted Serial Bootloaders for PICs!! |
|
|
bkamen
Joined: 07 Jan 2004
Posts: 1615
Location: Central Illinois, USA
|
|
| Posted: Sun Feb 07, 2010 9:36 pm |
|
|
| asmallri wrote: | | bkamen wrote: | huh??
The max3232 still puts out about 10V on the RS232 side running at 3.3 or 5. |
Not on the test boards I have. |
Funky. The spec reads +/-5 5 for a 10V swing.
Good to know.
Those spec sheets... they LIE... ;)
-Ben
_________________
Dazed and confused? I don't think so. Just "plain lost" will do. :D |
|
|
|
FAQ 
Search
Register
Profile 
Log in to check your private messages 
Log in
