CCS C Software and Maintenance Offers
FAQFAQ   FAQForum Help   FAQOfficial CCS Support   SearchSearch  RegisterRegister 

ProfileProfile   Log in to check your private messagesLog in to check your private messages   Log inLog in 

CCS does not monitor this forum on a regular basis.

Please do not post bug reports on this forum. Send them to CCS Technical Support
Interface nokia2626 with Pic18f4550 as GSM module

 
Post new topic   Reply to topic    CCS Forum Index -> General CCS C Discussion
View previous topic :: View next topic  
Author Message
Krazzy7434



Joined: 21 Aug 2014
Posts: 39
Location: India

View user's profile Send private message

Interface nokia2626 with Pic18f4550 as GSM module
PostPosted: Sat Dec 27, 2014 1:10 am     Reply with quote
Hello guys....

I have an old nokia 2626 phone...i thought of using it as a gsm module..
I dont know whether nokia2626 have a serial communication pins and support AT commands....
if somebody got any idea of this phone pins and how to configure it with pic18,
plz share it here...

THank You...
_________________
Krazzy7434
temtronic



Joined: 01 Jul 2010
Posts: 9244
Location: Greensville,Ontario

View user's profile Send private message

PostPosted: Sat Dec 27, 2014 6:18 am     Reply with quote
Obvious place to start is with Google! Try keywords like Nokia, model #2626, pinout' and see what hits you get.
IF you find out the hardware is good, then you'll need an interface cable AND a 3volt PIC (or proper logic level translation chip).
Do NOT think you can just connect and run a 5 volt PIC with a 3 volt device like cellphone!!


jay
Display posts from previous:   
Post new topic   Reply to topic    CCS Forum Index -> General CCS C Discussion All times are GMT - 6 Hours
Page 1 of 1

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum


Powered by phpBB © 2001, 2005 phpBB Group