HELP: Verify FAILED at data address 000h

zephyr2009 · Joined: 06 Aug 2010 Posts: 15

I have my JDM Programmer and my ICProg software.

I set the settings all correctly.
I tried to change the oscillator on different oscillator options.

But it didn't work

After programming my PIC16F877A it says "VERIFY FAILED AT DATA ADDRESS 000h".

Please help me. Thank you.

Abdulla M.A. · Joined: 28 Mar 2010 Posts: 30 Location: Baghdad, Iraq

Use PICprog with JDM programmer, ICprog will not work with it.

Abdulla
_________________
"A scientist can discover a new star, but he cannot make one. He would have to ask an engineer to do that."
"For an optimist the glass is half full, for a pessimist it's half empty, and for an engineer is twice bigger than necessary."

zephyr2009 · Joined: 06 Aug 2010 Posts: 15

Ttelmah · Joined: 11 Mar 2010 Posts: 19552

Er. Change whatever 'search' you are using....
Google, gives 55000 hits for 'PicProg'.
Third one down is:
http://www.winpicprog.co.uk/ which is the link to the current versions.

Best Wishes

Abdulla M.A. · Joined: 28 Mar 2010 Posts: 30 Location: Baghdad, Iraq

http://sites.google.com/site/abdulla877/file-cabinet

File name:Winpicpgm

Abdulla
_________________
"A scientist can discover a new star, but he cannot make one. He would have to ask an engineer to do that."
"For an optimist the glass is half full, for a pessimist it's half empty, and for an engineer is twice bigger than necessary."