CCS C Software and Maintenance Offers
FAQFAQ   FAQForum Help   FAQOfficial CCS Support   SearchSearch  RegisterRegister 

ProfileProfile   Log in to check your private messagesLog in to check your private messages   Log inLog in 

CCS does not monitor this forum on a regular basis.

Please do not post bug reports on this forum. Send them to CCS Technical Support

setup_adc() help with selecting clock source

 
Post new topic   Reply to topic    CCS Forum Index -> General CCS C Discussion
View previous topic :: View next topic  
Author Message
aruna1



Joined: 14 Oct 2008
Posts: 103

View user's profile Send private message

setup_adc() help with selecting clock source
PostPosted: Fri Oct 08, 2010 11:04 pm     Reply with quote

Hi guys can you please tell me how to select proper clock source parameter for function setup_adc() ?

There are lot of options like 0.2us, 0.8 us internal in pic c wizard but I have no idea which to select.

I use 16F876A with 4MHz crystal and CCS C V4.084.

Thank you
Ttelmah



Joined: 11 Mar 2010
Posts: 19546

View user's profile Send private message

PostPosted: Sat Oct 09, 2010 2:32 am     Reply with quote

The real source, is the _chips data sheet_....
Table 11-1.
The second line down the table (maximum device frequency 5MHz).

Best Wishes
Display posts from previous:   
Post new topic   Reply to topic    CCS Forum Index -> General CCS C Discussion All times are GMT - 6 Hours
Page 1 of 1

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum


Powered by phpBB © 2001, 2005 phpBB Group