Prime8 programmer

zhiwei chan · Joined: 10 Jan 2011 Posts: 1

Hi CCS colleague,

I am a test engineer in Emerson China. I am very interested in your product, Prime8 programmer. Here I have some questions below and hope that you could help.

1. There are 8 ports for the programming. So I think the speed should be fast. Could you tell the comparison between Microchip PM3 and Prime8 ?

2. If the programming time for 1 chip is 30 seconds, could you tell if the total time should be the same, 30 seconds, when programming 8 chips ?

3. I find Prime8 supports command line which is what I expect for production. So does it mean we can call this command lines for programming & verifying 8 ports at the same time ? How to identify them individually ? Is it similar to Microchip PM3 ?

4. I am not able to find the detailed instruction (data sheet) about Prime8, such as command line... So could you send me more info about this product ?

Looking forward to receiving your reply soon.

CCS Customer Relations · Joined: 04 Dec 2009 Posts: 3

If you have questions with regards to a particular CCS product or service, it is recommended that you contact CCS Sales directly via email to [email protected] or via phone at 262-522-6500 x35.

Thank you.