CCS :: View topic - 18F26K22 and SETUP_ADC_PORTS

CCS C Software and Maintenance Offers

FAQ

Official CCS Support

Profile Log in to check your private messages Log in

CCS does not monitor this forum on a regular basis.

Please do not post bug reports on this forum. Send them to CCS Technical Support

18F26K22 and SETUP_ADC_PORTS

CCS Forum Index -> General CCS C Discussion

View previous topic :: View next topic

Author

Message

hmmpic

Joined: 09 Mar 2010
Posts: 314
Location: Denmark

18F26K22 and SETUP_ADC_PORTS

Posted: Wed Feb 02, 2011 5:48 am

Reply with quote

Hi

Just switch from a smaller PIC to this one, and now the function SETUP_ADC_PORTS make this code?

Can any explain what the x38,x39... is?

Code:

SETUP_ADC_PORTS(P_ADTemp|VSS_FVR);
084A: MOVF ADCON1,W
084C: ANDLW F0
084E: IORLW 08
0850: MOVWF ADCON1
0852: MOVLW 01
0854: MOVLB F
0856: MOVWF x38
0858: MOVLW 00
085A: MOVWF x3C
085C: MOVWF x39
085E: MOVWF x3A
0860: MOVWF x3B

Ttelmah

Joined: 11 Mar 2010
Posts: 19552


Posted: Wed Feb 02, 2011 9:26 am

Selected bank number. So at B54, bank is set to 'F', giving B5A to B60, clearing locations F3C, F39, F3A and F3B, and B56 putting 1 into F38. These are the ANSEL registers. Best Wishes

hmmpic

Joined: 09 Mar 2010
Posts: 314
Location: Denmark


Posted: Wed Feb 02, 2011 10:55 am

Thanks:-)

Display posts from previous:

	CCS Forum Index -> General CCS C Discussion	All times are GMT - 6 Hours
Page 1 of 1

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum

Powered by phpBB © 2001, 2005 phpBB Group