|
|
View previous topic :: View next topic |
Author |
Message |
bbruce
Joined: 10 Feb 2011 Posts: 3
|
Problem with array of struct |
Posted: Fri Feb 11, 2011 7:47 am |
|
|
Hi all,
I am using PIC 18F4525, with this array of struct:
Code: |
typedef unsigned char BYTE;
typedef struct{
BYTE bDay;
BYTE bMon;
BYTE bYear;
BYTE bDow;
BYTE bH;
BYTE bM;
BYTE bS;
} TIMER_ST;
TIMER_ST gstTimerStart[3];
TIMER_ST gstTimerEnd[3];
|
It works fine when I was using an array with 3 elements, but when I start using 5 elements, it stop working, like I can't acess the array elements...
I did a test changing the struct size and it works:
Code: |
typedef unsigned char BYTE;
typedef struct{
BYTE bH;
BYTE bM;
} TIMER_ST;
TIMER_ST gstTimerStart[5];
TIMER_ST gstTimerEnd[5];
|
But I need to use the first struct.
How I can do to solve this problem ? |
|
|
Ttelmah
Joined: 11 Mar 2010 Posts: 19553
|
|
Posted: Fri Feb 11, 2011 10:19 am |
|
|
Compiler version?.
When asking _any_ question about a compiler problem (as opposed to stuff about interfacing), you need to tell us your compiler version. It'd cut the 'dross' here by a huge margin, if it was a 'capital' offence to not include this!...
Best Wishes |
|
|
bbruce
Joined: 10 Feb 2011 Posts: 3
|
|
Posted: Fri Feb 11, 2011 3:35 pm |
|
|
Ttelmah,
The version is 4.049 |
|
|
Ttelmah
Joined: 11 Mar 2010 Posts: 19553
|
|
Posted: Fri Feb 11, 2011 4:04 pm |
|
|
Ouch.
Unfortunately, the early V4 compilers, had major problems. Up to about 4.068, things like your problem were common. Unfortunately, I suspect you will either have to do a evil 'bodge round', and hope it works, or upgrade...
I keep all compilers I actually use for production code. The first 'V4' compiler I kept, was 4.070. Up to this point, 3.249, was far superior.
Best Wishes |
|
|
PCM programmer
Joined: 06 Sep 2003 Posts: 21708
|
|
Posted: Fri Feb 11, 2011 4:19 pm |
|
|
You didn't provide a test program, so I made one, and it works just fine
with 5 elements with vs. 4.049. Running the following program in MPLAB
simulator, I get this result:
Quote: |
1 2 3 4 5 6 7
8 9 10 11 12 13 14
15 16 17 18 19 20 21
22 23 24 25 26 27 28
29 30 31 32 33 34 35
|
Code: |
#include <18F4525.h>
#fuses INTRC_IO, NOWDT, BROWNOUT, PUT, NOLVP
#use delay(clock=4M)
#use rs232(baud=9600, UART1, errors)
typedef struct{
BYTE bDay;
BYTE bMon;
BYTE bYear;
BYTE bDow;
BYTE bH;
BYTE bM;
BYTE bS;
} TIMER_ST;
// Initialize the structure with incrementing data.
TIMER_ST gstTimerStart[5] = {
{1,2,3,4,5,6,7},
{8,9,10,11,12,13,14},
{15,16,17,18,19,20,21},
{22,23,24,25,26,27,28},
{29,30,31,32,33,34,35}
};
//============================
void main()
{
int8 i;
for(i = 0; i < 5; i++)
{
printf("%u ", gstTimerStart[i].bDay);
printf("%u ", gstTimerStart[i].bMon);
printf("%u ", gstTimerStart[i].bYear);
printf("%u ", gstTimerStart[i].bDow);
printf("%u ", gstTimerStart[i].bH);
printf("%u ", gstTimerStart[i].bM);
printf("%u ", gstTimerStart[i].bS);
printf("\r");
}
while(1);
} |
|
|
|
bbruce
Joined: 10 Feb 2011 Posts: 3
|
|
Posted: Fri Feb 11, 2011 8:41 pm |
|
|
Hi all....problem solved.
It wasn't the struct, I was using 3 arrays of int1. I Just changed it from int1 to int and works.
Thanks for the help! |
|
|
|
|
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum
|
Powered by phpBB © 2001, 2005 phpBB Group
|