PIC card with Ethernet

SherpaDoug · Joined: 07 Sep 2003 Posts: 1640 Location: Cape Cod Mass USA

Does anyone know where I might get a PCB with Ethernet and a moderate sized PIC? I can start with the CCS development boards and then layout my own without all the knobs and LCDs, but I would rather just buy something.

I need to get a PIC to extract some data from a broadcast Ethernet stream, and generate a sync pulse when it finds what it wants.
_________________
The search for better is endless. Instead simply find very good and get the job done.

asmallri · Joined: 12 Aug 2004 Posts: 1635 Location: Perth, Australia

Try www.ljcv.net - excellent quality.
_________________
Regards, Andrew

http://www.brushelectronics.com/software
Home of Ethernet, SD card and Encrypted Serial Bootloaders for PICs!!

SherpaDoug · Joined: 07 Sep 2003 Posts: 1640 Location: Cape Cod Mass USA

That looks like it might do the trick. Thanks!
_________________
The search for better is endless. Instead simply find very good and get the job done.

ezflyr · Joined: 25 Oct 2010 Posts: 1019 Location: Tewksbury, MA

Hi,

Another alternative might be the PIC-Web boards by Olimex available from Sparkfun.

Here is an example of a board I've played with: http://www.sparkfun.com/products/7829

John

bkamen · Posted: Sat Mar 12, 2011 9:52 pm

Microchip also sells the PICdem.net2.

It has the largest 8bit Ethernet PIC onboard (18F97J60) with also an ENC28j60 so you can switch to that if you want to use a PIC that lacks integrated ethernet.

-Ben
_________________
Dazed and confused? I don't think so. Just "plain lost" will do. :D

SherpaDoug · Joined: 07 Sep 2003 Posts: 1640 Location: Cape Cod Mass USA

Thanks for the ideas guys. This is the first project that will require me to go beyond my comfort zone with RS232 into a more modern interface.

I just got the book TCP/IP Lean and have ordered the CCS embedded Ethernet development kit. Are there any other references you can reccomend?

I foresee a lot of reading in my future.
_________________
The search for better is endless. Instead simply find very good and get the job done.

bkamen · Posted: Sun Mar 13, 2011 5:46 pm

Download the microchip application library and get the most up to date TCPIP stack.

It won't compile under CCS at the moment, but you can get an idea of how they have things working.

The CCS TCPIP stack is actually v3.75 of the Microchip stack.

Currently, Microchip is on (I think) version 5.32.

Give you an idea of what's missing. ;)

-Ben
_________________
Dazed and confused? I don't think so. Just "plain lost" will do. :D

drx2k · Joined: 31 Mar 2010 Posts: 10