CCS :: View topic - Loop problem

FAQ

Forum Help

Official CCS Support

Profile Log in to check your private messages Log in

CCS does not monitor this forum on a regular basis.

Please do not post bug reports on this forum. Send them to CCS Technical Support

Loop problem

CCS Forum Index -> General CCS C Discussion

View previous topic :: View next topic

Author

Message

xman_di

Joined: 24 Mar 2011
Posts: 2
Location: Newport, RI

Loop problem

Posted: Thu Mar 24, 2011 8:33 am

I have a PIC18F6585 in use for many things. With the following code, the read works fine. If I try to make it a for loop (in comments), it doesn't work. What is up?

Code:

#INT_TIMER1
void adc_interrupt (void) //setup interrupt
{
int16 i;

i = 15;
adc_value = 0;
output_low(ADC_convert);          //ADC track and hold on falling edge

while(input(ADC_busy)){}             //wait for conversion complete
output_high(ADC_convert);

/*
for(i=15;i>=0;i--){
output_high(ADC_clock);
output_low(ADC_clock);
if(input(ADC_data))
      bit_set(adc_value,i);
}
*/

   output_high(ADC_clock);
   output_low(ADC_clock);

   if(input(ADC_data))
      bit_set(adc_value,15);
   else
      bit_clear(adc_value,15);

   output_high(ADC_clock);
   output_low(ADC_clock);
   if(input(ADC_data))
      bit_set(adc_value,14);
   else
      bit_clear(adc_value,14);

   output_high(ADC_clock);
   output_low(ADC_clock);
   if(input(ADC_data))
      bit_set(adc_value,13);
   else
      bit_clear(adc_value,13);

   output_high(ADC_clock);
   output_low(ADC_clock);
   if(input(ADC_data))
      bit_set(adc_value,12);
   else
      bit_clear(adc_value,12);

   output_high(ADC_clock);
   output_low(ADC_clock);
   if(input(ADC_data))
      bit_set(adc_value,11);
   else
      bit_clear(adc_value,11);

   output_high(ADC_clock);
   output_low(ADC_clock);
   if(input(ADC_data))
      bit_set(adc_value,10);
   else
      bit_clear(adc_value,10);

   output_high(ADC_clock);
   output_low(ADC_clock);
   if(input(ADC_data))
      bit_set(adc_value,9);
   else
      bit_clear(adc_value,9);

   output_high(ADC_clock);
   output_low(ADC_clock);
   if(input(ADC_data))
      bit_set(adc_value,8);
   else
      bit_clear(adc_value,8);

   output_high(ADC_clock);
   output_low(ADC_clock);
   if(input(ADC_data))
      bit_set(adc_value,7);
   else
      bit_clear(adc_value,7);

   output_high(ADC_clock);
   output_low(ADC_clock);
   if(input(ADC_data))
      bit_set(adc_value,6);
   else
      bit_clear(adc_value,6);

   output_high(ADC_clock);
   output_low(ADC_clock);
   if(input(ADC_data))
      bit_set(adc_value,5);
   else
      bit_clear(adc_value,5);

   output_high(ADC_clock);
   output_low(ADC_clock);
   if(input(ADC_data))
      bit_set(adc_value,4);
   else
      bit_clear(adc_value,4);

   output_high(ADC_clock);
   output_low(ADC_clock);
   if(input(ADC_data))
      bit_set(adc_value,3);
   else
      bit_clear(adc_value,3);

   output_high(ADC_clock);
   output_low(ADC_clock);
   if(input(ADC_data))
      bit_set(adc_value,2);
   else
      bit_clear(adc_value,2);

   output_high(ADC_clock);
   output_low(ADC_clock);
   if(input(ADC_data))
      bit_set(adc_value,1);
   else
      bit_clear(adc_value,1);

   output_high(ADC_clock);
   output_low(ADC_clock);
   if(input(ADC_data))
      bit_set(adc_value,0);
   else
      bit_clear(adc_value,0);
}

newguy

Joined: 24 Jun 2004
Posts: 1909

Posted: Thu Mar 24, 2011 9:11 am

Change

Code:

int16 i;

Code:

signed int16 i;

and it will work. int16's are unsigned by default, so your loop's test (is i >= 0?) will always be true.

xman_di

Joined: 24 Mar 2011
Posts: 2
Location: Newport, RI


Posted: Thu Mar 24, 2011 9:25 am

Thanks! Works great now!

Display posts from previous:

	CCS Forum Index -> General CCS C Discussion	All times are GMT - 6 Hours
Page 1 of 1

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum