 |
 |
| View previous topic :: View next topic |
| Author |
Message |
bright
Joined: 24 Apr 2011
Posts: 14
|
| problem with an error |
 Posted: Thu Apr 28, 2011 12:44 pm |
 |
|
| When I compile my code, it keeps on having 1 error and the error message is the following: *** Error 100 "nRF905&PIC16F690.c" Line 5(5,55): USE parameter value is out of range Not a number: 960055=5553=53. And line 5 is the following: #use rs232(baud=9600, xmit=PIN_B7, rcv=PIN_B5, bits=8) and I am using the pic16f690 microcontroller. Does anyone know how to solve this problem? |
|
 |
PCM programmer
Joined: 06 Sep 2003
Posts: 21708
|
|
| Posted: Thu Apr 28, 2011 1:14 pm |
|
|
Post a short complete test program that shows the problem.
Example:
| Code: | #include <16F690.h>
#fuses INTRC_IO, NOWDT, NOBROWNOUT, PUT, NOMCLR
#use delay(clock=8000000)
#use rs232(baud=9600, xmit=PIN_B7, rcv=PIN_B5, ERRORS)
//=============================
void main()
{
char c;
printf("Start \n\r");
while(1)
{
c = getc();
putc(c);
}
} |
Also post your compiler version. |
|
|
Ttelmah
Joined: 11 Mar 2010
Posts: 19551
|
|
| Posted: Fri Apr 29, 2011 4:14 am |
|
|
Also, a 'comment'.
The numbers after the error, are the line and column numbers where the compiler is 'seeing' the error. In this case column 55. The #use r232 statement posted, is only 53? (only counted quickly) characters long. I'd suspect the error is being seen at the end of line, and probably reflects a typing 'silly' somewhere in the line. Possibly a hyphen, not an under-bar, in a pin name, a full stop rather than a comma, etc.. Even possiblyy a 'hidden character' (there are some keycodes that generate 'non visible' characters - this used to be a 'annoy people' trick, with a line that appeared perfect, yet would give a syntax error).
Best Wishes |
|
|
bright
Joined: 24 Apr 2011
Posts: 14
|
|
| Posted: Fri Apr 29, 2011 5:40 am |
|
|
| Thank you all for your replies, I have solved the problem. I had a similar line in my header file and that is what was causing the problem. |
|
|
|
|
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
|
Powered by phpBB © 2001, 2005 phpBB Group
|
FAQ 
Search
Register
Profile 
Log in to check your private messages 
Log in
