CCS C Software and Maintenance Offers
FAQFAQ   FAQForum Help   FAQOfficial CCS Support   SearchSearch  RegisterRegister 

ProfileProfile   Log in to check your private messagesLog in to check your private messages   Log inLog in 

CCS does not monitor this forum on a regular basis.

Please do not post bug reports on this forum. Send them to CCS Technical Support
18f4550

 
Post new topic   Reply to topic    CCS Forum Index -> General CCS C Discussion
View previous topic :: View next topic  
Author Message
ccs1



Joined: 22 Feb 2015
Posts: 1

View user's profile Send private message

18f4550
PostPosted: Sun Feb 22, 2015 11:39 pm     Reply with quote
Code:
set_tris_b(0);
output_b(0);
 
while(1)
  {
    output_high(pin_b0);
    delay_ms(1000);
     
    output_low(pin_b0);
    delay_ms(1000);
  }

This code display me led blinking.

Now how I can be blinking led from left to right?

Initially 1 led on, after 1 sec this led off and next led will be on and continue.

thank you
PCM programmer



Joined: 06 Sep 2003
Posts: 21708

View user's profile Send private message

PostPosted: Mon Feb 23, 2015 1:01 am     Reply with quote
This post has an example of how to blink leds sequentially:
http://www.ccsinfo.com/forum/viewtopic.php?t=52794&start=2
Display posts from previous:   
Post new topic   Reply to topic    CCS Forum Index -> General CCS C Discussion All times are GMT - 6 Hours
Page 1 of 1

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum


Powered by phpBB © 2001, 2005 phpBB Group