CCS C Software and Maintenance Offers
FAQFAQ   FAQForum Help   FAQOfficial CCS Support   SearchSearch  RegisterRegister 

ProfileProfile   Log in to check your private messagesLog in to check your private messages   Log inLog in 

CCS does not monitor this forum on a regular basis.

Please do not post bug reports on this forum. Send them to CCS Technical Support

SD fat32 write problem

 
Post new topic   Reply to topic    CCS Forum Index -> General CCS C Discussion
View previous topic :: View next topic  
Author Message
kalambraka



Joined: 24 Jan 2012
Posts: 4

View user's profile Send private message

SD fat32 write problem
PostPosted: Tue Jan 24, 2012 10:37 pm     Reply with quote

Hi guys!

I'm interfacing a PIC18F2455 with a SD card using the mmc_spi_fat32.c library.

I send data coming from sensors to the card using the fwrite function, and then I can see it (so, it's seems that everything is OK), but I realize that it only writes the half of my data into the card. If I send 4 datas using fwrite I can only see 2 in the card. If I send 8, I see 4...

I write this test program sending the data in a loop:

Code:

#include <18F2455.h>


#use delay(clock=4000000)

#include "mmc_spi_fat32.h"


#include <usb_cdc.h>
#include <string.h>
#include "mmc_spi_fat32.c"




#ZERO_RAM
void main(){
  delay_ms(1000);
  char file,gfilename[5];
  int t[3];
  int h[3];
  int p[3];
  int l=3,x=1;
  int mesura=0;
 
   
  usb_cdc_init();
  usb_init();
 
 
  while(!usb_cdc_connected()) {}         // Espera fins detectar una transmisió USB
 
  if (usb_enumerated()){                 // El PC reconeix el dispositiu
 
   usb_task();
 
   delay_ms(1000);
   
 

      MMCInit() == MMC_OK;
    while(MMCInit() != MMC_OK){ //espera inicialitzacio
      printf(usb_cdc_putc,"MMC init FAIL!!!!!\r\n");
      printf(usb_cdc_putc,"Try again...\r\n");
      delay_ms(100);
      MMCInit() == MMC_OK;
    }
      printf(usb_cdc_putc,"MMC init OK!!!!!\r\n"); 
      delay_ms(1000);
      InitFAT();
      printf(usb_cdc_putc,"FAT init OK!!!!!\r\n");
      delay_ms(1000);
      strcpy(gfilename,"D.LOG"); 
       
     
       
      file = fopen(gfilename,'w'); // open EVENTS.LOG for append      ////
      if (file & MMC_ERROR)                                           ////
      {                                                            ////
         printf(usb_cdc_putc,"Couldn't open file!\r\n");                        ////
            if(file == MMC_NO_CARD_INSERTED)                             ////
               printf(usb_cdc_putc,"Please, insert MMC!");                         ////
            else if(file == MMC_MAX_FILES_REACHED)                       ////
               printf(usb_cdc_putc,"ops.. =)");                                    ////
    }                                                            ////
    else                                                         ////
    {
   
//#ZERO_RAM
DELAY_MS(1000);

 t[0]=02;
 t[1]=02;
 t[2]=02;

   
  h[0]=03;
  h[1]=03;
  h[2]=03;
 
 
  p[0]=04;
  p[1]=04;
  p[2]=04;

   while(mesura<4){
     
     
      printf(usb_cdc_putc,"Start writing...\r\n");

 
      fwrite(t,l,file);
      delay_ms(10);

      fwrite(h,l,file);
      delay_ms(10);

      fwrite(p,l,file);
      delay_ms(10);


      delay_ms(10);
           
      fclose(file);
      delay_ms(10);
      delay_ms(100);
 
      printf(usb_cdc_putc,"Write complete...");
      mesura=mesura+1;
      }
     
      delay_ms(100);
    }             
     
  }
 
 
 
}
 


In the SD card I should see:
222333444
222333444
222333444
222333444

but I always see only half:
222333444
222333444

Can anyone help me?

Thank you.
Ttelmah



Joined: 11 Mar 2010
Posts: 19544

View user's profile Send private message

PostPosted: Wed Jan 25, 2012 2:23 am     Reply with quote

I'm surprised you see half.
Don't you think the fact that you have closed the file after writing the first 9 bytes, and don't open it again, might have something to do with it.

Best Wishes
kalambraka



Joined: 24 Jan 2012
Posts: 4

View user's profile Send private message

PostPosted: Wed Jan 25, 2012 11:55 am     Reply with quote

Thanks for the reply.

If I open again the file inside the loop, then I see nothing in the SD card...
It's really strange...

The only solution that I found is sending data with zeros in another loop after this... I think that maybe it's something related to cleaning the buffer afer writing again...
Display posts from previous:   
Post new topic   Reply to topic    CCS Forum Index -> General CCS C Discussion All times are GMT - 6 Hours
Page 1 of 1

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum


Powered by phpBB © 2001, 2005 phpBB Group