Help, 7816-3 Library need (Smart Card)

Scanny · Joined: 13 Jan 2006 Posts: 5 Location: Italy

Hi Guys,

I'm looking for C source code in order to implement with a PIC the ISO 7816-3 Electrical and communication Layer.

PIC has not be choosen yet.

I don't want to use an external Hw driver.
I want to use the PIC IO in order to command the Reset, Clk and Data signals .

Does someone already write this code ?
Any help or suggestion ?

Thank you.

Paolo

danny1331 · Joined: 23 Feb 2012 Posts: 1

Hi Scanny,

I saw your post online. It has been almost 5years since but I am interested if you were able to implement such application using PIC.

Currently, I have the same issue and looking for C source code on the ISO7816-3 implementation.

Any chance you can provide me the C source code of your development?

Thank you and hoping to hear from you.

Best regards,
Danny

temtronic · Posted: Fri Feb 24, 2012 6:18 am

Google 'ISO 7816-3' and you'll get about 1/4 million hits, within the first page is detailed ,bit by bit information on the protocol .

It AIN'T rocket science..

Heck the basic driver could be cut in less than a day if you're good with C. If not, use PIC assembler to create the driver, and then 'call' it from your main C program.