| View previous topic :: View next topic |
| Author |
Message |
ubaidullah
Joined: 07 Aug 2013
Posts: 2
Location: Pakistan
|
| Help about LCD Controller |
 Posted: Wed Aug 07, 2013 5:16 pm |
 |
|
Dear Friends
Please help me that how I know about any Mobile LCD controller, like Nokia or China Mobile LCD for interfacing with microcontroller.
Thanks. |
|
 |
temtronic
Joined: 01 Jul 2010
Posts: 9246
Location: Greensville,Ontario
|
|
| Posted: Wed Aug 07, 2013 5:37 pm |
|
|
Sorry but your question is too 'general'. Without a specific LCD module or PIC it's impossible to help you.
As a general comment though, since those LCD modules are probably 3 volt devices, it's best to use a 3 volt PIC. There are the ones like 18LF46K22, the 'L' means low voltage...and will directly interface with 3 volt devices.
Some of the LCD units use SPI to communicate with, though without a product, no one can really say for sure.
hth
jay |
|
|
ubaidullah
Joined: 07 Aug 2013
Posts: 2
Location: Pakistan
|
|
| Posted: Sun Aug 11, 2013 8:50 am |
|
|
| temtronic wrote: | Sorry but your question is too 'general'. Without a specific LCD module or PIC it's impossible to help you.
As a general comment though, since those LCD modules are probably 3 volt devices, it's best to use a 3 volt PIC. There are the ones like 18LF46K22, the 'L' means low voltage...and will directly interface with 3 volt devices.
Some of the LCD units use SPI to communicate with, though without a product, no one can really say for sure.
hth
jay |
Dear I ask about controller of LCD not a interfacing controller for LCD. for example if I want to used LCD of Nokia X3, how I know its pin outs and its controller.
kindly help and thanks for that. |
|
|
temtronic
Joined: 01 Jul 2010
Posts: 9246
Location: Greensville,Ontario
|
|
| Posted: Sun Aug 11, 2013 9:25 am |
|
|
Well now we know what LCD module you're interested in.
Jut google 'LCD Nokia X3 pinout' and you should get 100,000+ hits.
Hope you have real good eyesight, that's a might small connector!!
I'd buy the mating connector to help connect to a breadboard then the PIC.
hth
jay |
|
|
|
FAQ 
Search
Register
Profile 
Log in to check your private messages 
Log in
