CCS C Software and Maintenance Offers
FAQFAQ   FAQForum Help   FAQOfficial CCS Support   SearchSearch  RegisterRegister 

ProfileProfile   Log in to check your private messagesLog in to check your private messages   Log inLog in 

CCS does not monitor this forum on a regular basis.

Please do not post bug reports on this forum. Send them to CCS Technical Support
PIC18F87K22 Board....

 
Post new topic   Reply to topic    CCS Forum Index -> General CCS C Discussion
View previous topic :: View next topic  
Author Message
ihsanbu



Joined: 14 Oct 2006
Posts: 27
Location: islamabad,pakistan

View user's profile Send private message AIM Address Yahoo Messenger MSN Messenger

PIC18F87K22 Board....
PostPosted: Mon Aug 19, 2013 1:00 am     Reply with quote
I am working on PIC Micro-controller PIC18F87K22. Board contain LCD .....

1- Configuration bit at ccs c for above mention pic.

2- LCD(2x16) drive help like Flexible LCD driver.
LCD pins are

RB0----RB3 >>>>>LCD (D4----->D7)
R/W = GND
RB4 = RS
RB5 = E
How i can do modification in flex_lcd driver....
_________________
ihsan ullah khan
Embedded Designer Since 2003
Ttelmah



Joined: 11 Mar 2010
Posts: 19553

View user's profile Send private message

PostPosted: Mon Aug 19, 2013 1:03 am     Reply with quote
Try reading the first five lines of the flex_lcd.c file.
It tells you what you have to do.
Display posts from previous:   
Post new topic   Reply to topic    CCS Forum Index -> General CCS C Discussion All times are GMT - 6 Hours
Page 1 of 1

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum


Powered by phpBB © 2001, 2005 phpBB Group