Custom char LCD 16x2 (GDM1602A)??

aasanchez · Joined: 17 May 2013 Posts: 8

I need make a custom char in my program, like example 1 in this generator http://mikeyancey.com/hamcalc/lcd_characters.php but can't find information about lcd_set_cgram_char or another method to to this in ccs...

PCM programmer · Joined: 06 Sep 2003 Posts: 21708

Remember your previous question about a pcf8583 driver ?
http://www.ccsinfo.com/forum/viewtopic.php?t=51066
I told you to use the forum search page. I don't know if you did that.

Well, your current question is going to get the same answer.
There is code in the forum archives but you have to search for it.

Go to the forum search page:
http://www.ccsinfo.com/forum/search.php
Type this in:

aasanchez · Joined: 17 May 2013 Posts: 8

I try search about "lcd_set_cgram_char" function and no give me results.. but thanks...

dyeatman · Joined: 06 Sep 2003 Posts: 1934 Location: Norman, OK

Try searching for lcd_set_cgram*
_________________
Google and Forum Search are some of your best tools!!!!

PCM programmer · Joined: 06 Sep 2003 Posts: 21708

I said to search for this: