CCS C Software and Maintenance Offers
FAQFAQ   FAQForum Help   FAQOfficial CCS Support   SearchSearch  RegisterRegister 

ProfileProfile   Log in to check your private messagesLog in to check your private messages   Log inLog in 

CCS does not monitor this forum on a regular basis.

Please do not post bug reports on this forum. Send them to CCS Technical Support
programmer elm327

 
Post new topic   Reply to topic    CCS Forum Index -> General CCS C Discussion
View previous topic :: View next topic  
Author Message
zikoses



Joined: 27 Mar 2015
Posts: 4

View user's profile Send private message

programmer elm327
PostPosted: Mon Apr 20, 2015 6:24 am     Reply with quote
hello

I am a student and I work on an OBD2 project.
I made an electronic board based on ELM327 and MCP2551.
Now I am in the programming phase of the ELM327.
I have many problems ..... I find no documentation on this type of programming.
And what language can I use for CAN program ?

Can you help me and thanks !!
dyeatman



Joined: 06 Sep 2003
Posts: 1937
Location: Norman, OK

View user's profile Send private message

PostPosted: Mon Apr 20, 2015 3:57 pm     Reply with quote
This is the user forum for CCS C PIC programming.
This is not an OBDII programming board.

Implementing CAN in C on a PIC is not an easy project and would be way
over your head. If you dont know C I recommend you start simpler.

A good start:
http://pic-microcontroller.com/obd-ii-elm327-compatible-allpro-adapter-using-pic18f2455/
_________________
Google and Forum Search are some of your best tools!!!!
Display posts from previous:   
Post new topic   Reply to topic    CCS Forum Index -> General CCS C Discussion All times are GMT - 6 Hours
Page 1 of 1

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum


Powered by phpBB © 2001, 2005 phpBB Group