CCS C Software and Maintenance Offers
FAQFAQ   FAQForum Help   FAQOfficial CCS Support   SearchSearch  RegisterRegister 

ProfileProfile   Log in to check your private messagesLog in to check your private messages   Log inLog in 

CCS does not monitor this forum on a regular basis.

Please do not post bug reports on this forum. Send them to CCS Technical Support
RN4020 SSP profile

 
Post new topic   Reply to topic    CCS Forum Index -> General CCS C Discussion
View previous topic :: View next topic  
Author Message
championx



Joined: 28 Feb 2006
Posts: 151

View user's profile Send private message

RN4020 SSP profile
PostPosted: Fri Oct 23, 2015 5:56 am     Reply with quote
Hi all! I'm trying to use a RN4020 module, it is just the rn4020 plus a max3232. I see that the wake_sw and wake_hw are connected to Vcc.

It only provides connection to TX and RX, is that enough to use this module? I have used the RN41 and RN52 only.

Thanks!
temtronic



Joined: 01 Jul 2010
Posts: 9249
Location: Greensville,Ontario

View user's profile Send private message

PostPosted: Fri Oct 23, 2015 2:09 pm     Reply with quote
When posting a request like yours, you should include a link to the exact module you're using.we shouldn't have to waste time trying to decide which xxxxx module you have.
Also post which PIC you're using.

These days most 'modules' are 3 volt devices and to me PICs require 5 volts so interfacing is usually 99% of the 'problem.

The more information you supply the faster you'll get answers

Jay
Display posts from previous:   
Post new topic   Reply to topic    CCS Forum Index -> General CCS C Discussion All times are GMT - 6 Hours
Page 1 of 1

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum


Powered by phpBB © 2001, 2005 phpBB Group