CCS C Software and Maintenance Offers
FAQFAQ   FAQForum Help   FAQOfficial CCS Support   SearchSearch  RegisterRegister 

ProfileProfile   Log in to check your private messagesLog in to check your private messages   Log inLog in 

CCS does not monitor this forum on a regular basis.

Please do not post bug reports on this forum. Send them to CCS Technical Support
Need to control five servos with 18F2520

 
Post new topic   Reply to topic    CCS Forum Index -> General CCS C Discussion
View previous topic :: View next topic  
Author Message
mikellol



Joined: 20 Nov 2016
Posts: 1

View user's profile Send private message

Need to control five servos with 18F2520
PostPosted: Sun Nov 20, 2016 9:15 pm     Reply with quote
Someone can help me? I have troubles with a 18F2520 PIC. I need it to move a mechanical arm with five servos. If somebody could help I will be very thankful.
Ttelmah



Joined: 11 Mar 2010
Posts: 19535

View user's profile Send private message

PostPosted: Mon Nov 21, 2016 1:40 am     Reply with quote
Look in the code library here. There are two sets of code there for multiple servos. Both possibly a little limited, but with care they may do what you need.
temtronic



Joined: 01 Jul 2010
Posts: 9237
Location: Greensville,Ontario

View user's profile Send private message

PostPosted: Mon Nov 21, 2016 6:15 am     Reply with quote
'servos'... assuming the RC style, yes, MT T is correct,code is in the library..

You an easily control 8 RC servos with any PIC,even a 16C71 !

Jay
Display posts from previous:   
Post new topic   Reply to topic    CCS Forum Index -> General CCS C Discussion All times are GMT - 6 Hours
Page 1 of 1

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum


Powered by phpBB © 2001, 2005 phpBB Group