CCS C Software and Maintenance Offers
FAQFAQ   FAQForum Help   FAQOfficial CCS Support   SearchSearch  RegisterRegister 

ProfileProfile   Log in to check your private messagesLog in to check your private messages   Log inLog in 

CCS does not monitor this forum on a regular basis.

Please do not post bug reports on this forum. Send them to CCS Technical Support
RealICE with CCS

 
Post new topic   Reply to topic    CCS Forum Index -> General CCS C Discussion
View previous topic :: View next topic  
Author Message
Heath



Joined: 21 Dec 2007
Posts: 41

View user's profile Send private message

RealICE with CCS
PostPosted: Thu Apr 09, 2009 10:41 am     Reply with quote
Hello,

Does anyone use the RealICE as a programmer after building with CCS?

I can 'successfully' program and verify the device. I say 'successfully' because once it is done the controller doesn't operate as I think it should.

I have another ICSP programmer that I can program this hex file with and then the controller operates as I think it should.

Has anyone experienced this? My buddy at work uses Microchip's C18 compiler and hasn't had a problem with his RealICE. I thought it might be CCS?
asmallri



Joined: 12 Aug 2004
Posts: 1635
Location: Perth, Australia

View user's profile Send private message Send e-mail Visit poster's website

Re: RealICE with CCS
PostPosted: Thu Apr 09, 2009 10:42 am     Reply with quote
Heath wrote:
Hello,

Does anyone use the RealICE as a programmer after building with CCS??


Yes however I use the Microchip IDE
_________________
Regards, Andrew

http://www.brushelectronics.com/software
Home of Ethernet, SD card and Encrypted Serial Bootloaders for PICs!!
Heath



Joined: 21 Dec 2007
Posts: 41

View user's profile Send private message

PostPosted: Thu Apr 09, 2009 10:46 am     Reply with quote
You don't have any problems programming; problems like I've described?
Heath



Joined: 21 Dec 2007
Posts: 41

View user's profile Send private message

PostPosted: Thu Apr 09, 2009 12:07 pm     Reply with quote
I programmed with the RealICE then verified it with another ICSP programmer that I have and it didn't check out.

Andrew, did you do anything special to make it work for you?
asmallri



Joined: 12 Aug 2004
Posts: 1635
Location: Perth, Australia

View user's profile Send private message Send e-mail Visit poster's website

PostPosted: Thu Apr 09, 2009 1:11 pm     Reply with quote
Heath wrote:
I programmed with the RealICE then verified it with another ICSP programmer that I have and it didn't check out.

Andrew, did you do anything special to make it work for you?


No - plugged it it, selected it as the programmer in MPLAB and programmed away...

I am using MPLAB 8.10
_________________
Regards, Andrew

http://www.brushelectronics.com/software
Home of Ethernet, SD card and Encrypted Serial Bootloaders for PICs!!
Display posts from previous:   
Post new topic   Reply to topic    CCS Forum Index -> General CCS C Discussion All times are GMT - 6 Hours
Page 1 of 1

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum


Powered by phpBB © 2001, 2005 phpBB Group