help in output file (.h)

[rajabcomp2]

hi guys,

I am new in ccs c compiler, so that I would ask you when I build my program and it give me no error or warning.

That means the program doesn't have any error and I get the output, but my problem I couldn't find the hexadecimal file output.

You help in this please how can I get the hexadecimal file.

Thank you in advance

[robomaniac]

In MPLAB IDE, when you can compile your code, the .hex file is generated directly in your project root directory. In the same place where your .c file is.

You can also use F3 in windows explorer and search for *.hex files.

When you have a error and your code does not compile, that will not create a .hex file. Not in your case.
_________________
Jérôme Demers
www.jeromedemers.com

[rajabcomp2]

Ok, let me say that. I tried to do what you had mentioned above, but no way to get it !!!
I didn't get any error, and the message below after the build all program

[[email protected]]

I think it happened to me in the past. It means that your compiler did not even start executing a compilation. Check it.
_________________
Gil F.