CCS C Software and Maintenance Offers
FAQFAQ   FAQForum Help   FAQOfficial CCS Support   SearchSearch  RegisterRegister 

ProfileProfile   Log in to check your private messagesLog in to check your private messages   Log inLog in 

CCS does not monitor this forum on a regular basis.

Please do not post bug reports on this forum. Send them to CCS Technical Support
servo..

 
Post new topic   Reply to topic    CCS Forum Index -> General CCS C Discussion
View previous topic :: View next topic  
Author Message
lucasromeiro



Joined: 27 Mar 2010
Posts: 167

View user's profile Send private message

servo..
PostPosted: Sat Mar 27, 2010 11:43 am     Reply with quote
Hello guys...
I have a problem, I need to move a servo using a pic 16f887 common i/o pin because the CCP pins are already being used by other DC motors. The challenge is to move one at a time the slave, then moving one 2-ways. I can not do it. I tried several times to solve the problem, including in the simulator.
Look at the code and the circuit:
http://rapidshare.com/files/368594143/Lucas.rar.html
or
http://www.megaupload.com/?d=6B3924QG
Display posts from previous:   
Post new topic   Reply to topic    CCS Forum Index -> General CCS C Discussion All times are GMT - 6 Hours
Page 1 of 1

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum


Powered by phpBB © 2001, 2005 phpBB Group