CCS :: View topic - 16f883 config fuses problem

CCS C Software and Maintenance Offers

FAQ

Official CCS Support

Profile Log in to check your private messages Log in

CCS does not monitor this forum on a regular basis.

Please do not post bug reports on this forum. Send them to CCS Technical Support

16f883 config fuses problem

CCS Forum Index -> General CCS C Discussion

View previous topic :: View next topic

Author

Message

haqamar

Joined: 26 Dec 2011
Posts: 3

16f883 config fuses problem

Posted: Wed Jan 25, 2012 1:39 pm

Reply with quote

Unable to set the fuses properly for 16f883 in ccs ver 4.110. Is this correct format ?

Code:

#include <16f883.h>
#fuses HS, NOWDT, NOLVP, NOBROWNOUT, NOPROTECT, NOPUT
#use delay(oscillator=20M)

After compilation I see EC_IO instead of external HS oscillator...
plzz help

Ttelmah

Joined: 11 Mar 2010
Posts: 19540

Posted: Wed Jan 25, 2012 3:37 pm

Reply with quote

Code:

#include <16f883.h>
#fuses HS, NOWDT, NOLVP, NOBROWNOUT, NOPROTECT, NOPUT
#use delay(clock=20M)

The keywords 'crystal', and 'oscillator' in use delay, override the fuse selection, instead using the crystal or internal oscillator respectively.
Don't put extra spaces between the 'use' and the 'delay' on some compiler versions this will cause problems.

Best Wishes

haqamar

Joined: 26 Dec 2011
Posts: 3


Posted: Wed Jan 25, 2012 4:11 pm

thanx for pointing 'clock'

Display posts from previous:

	CCS Forum Index -> General CCS C Discussion	All times are GMT - 6 Hours
Page 1 of 1

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum

Powered by phpBB © 2001, 2005 phpBB Group