| View previous topic :: View next topic |
| Author |
Message |
moha-affa
Joined: 16 May 2015
Posts: 18
Location: istanbul-turkey
|
| 18f25k80 & 18f4580 |
 Posted: Thu Jun 04, 2015 1:35 am |
 |
|
Is there any difference between 18f4580 and 18f25k80 with CAN bus ??...
I've replaced my 18f4580 with 18f25k80 but the whole circuit still the same
but the new chip didn't send CAN messages ...
can anyone help please.... |
|
 |
gaugeguy
Joined: 05 Apr 2011
Posts: 303
|
|
| Posted: Thu Jun 04, 2015 6:37 am |
|
|
There are a lot of significant differences in the pin-out, FSR's, and CAN features. You will need to go through the data sheet to determine which differences may or may not be affecting you.
The VDDcore/Vcap pin must be properly connected on the K80's.
There are also significant errata on some peripherals that should be checked. |
|
|
moha-affa
Joined: 16 May 2015
Posts: 18
Location: istanbul-turkey
|
|
| Posted: Fri Jun 05, 2015 8:26 am |
|
|
thank you for replying ..
i didnt understand what did you mean with k80 .....
i hope that i didnt look like an idiot ,,,
regards |
|
|
temtronic
Joined: 01 Jul 2010
Posts: 9245
Location: Greensville,Ontario
|
|
| Posted: Fri Jun 05, 2015 9:12 am |
|
|
k80 is 'short form' for PIC18F25K80...
saves a LOT of typing and potential spelling mistakes
Jay |
|
|
|
FAQ 
Search
Register
Profile 
Log in to check your private messages 
Log in
