 |
 |
| View previous topic :: View next topic |
| Author |
Message |
anilmanisingh
Joined: 31 Mar 2011
Posts: 6
|
| Unable to display function in 16 x 2 LCD in second Line |
 Posted: Thu Sep 10, 2015 12:20 am |
 |
|
Hi , Everyone
I am using two push buttons to display two parameters at same time.
But I am unable to do so. I want to change my program each time I press the pushbutton1 in Line 1 and in Line 2 I want to change function F with each press of the other pushbutton2.
Please help me.
| Code: |
#include <16f876a.h>
#fuses XT,NOWDT,NOPROTECT,PUT,NOLVP
#use delay (clock=4000000)
#use standard_io(b)
#define use_portb_lcd TRUE
#include<lcd.c>
/// Program Function
void program(char);
void freq(char);
///PROGRAM
void main(void)
{
char option=0;
char option2=0;
setup_ccp1(CCP_PWM);
lcd_init();
program(option);
freq(option2);
for(;;){
if(!input(PIN_A0)){
do{
}while(!input(PIN_A0));
option++;
if(option>9)
option=0;
program(option);
}
if(!input(PIN_A1)){
do{
}while(!input(PIN_A1));
option2++;
if(option2>4)
option2=0;
freq(option2);
}
}
}
void program(char menu)
{
lcd_putc("\f");
switch(menu){
case 0:
lcd_gotoxy(1,1);
printf(lcd_putc,"\fPROGRAM: M.STI");
break;
case 1:
lcd_gotoxy(1,1);
printf(lcd_putc,"\fPROGRAM: I.LOS");
break;
case 2:
lcd_gotoxy(1,1);
printf(lcd_putc,"\fPROGRAM: W.LOS");
break;
case 3:
lcd_gotoxy(1,1);
printf(lcd_putc,"\fPROGRAM: B.TON");
break;
case 4:
lcd_gotoxy(1,1);
printf(lcd_putc,"\fPROGRAM: B.SCU");
break;
case 5:
lcd_gotoxy(1,1);
printf(lcd_putc,"\fPROGRAM: B.SHA");
break;
case 6:
lcd_gotoxy(1,1);
printf(lcd_putc,"\fPROGRAM: B.COR");
break;
case 7:
lcd_gotoxy(1,1);
printf(lcd_putc,"\fPROGRAM: B.FIR");
break;
case 8:
lcd_gotoxy(1,1);
printf(lcd_putc,"\fPROGRAM: TUMMY");
break;
case 9:
lcd_gotoxy(1,1);
printf(lcd_putc,"\PROGRAM: F.LIF");
}
}
void freq(char menu)
{
lcd_putc("\f");
switch(menu){
case 0:
lcd_gotoxy(1,2);
printf(lcd_putc,"\nF : 1 ");
break;
case 1:
lcd_gotoxy(1,2);
printf(lcd_putc,"\nF : 2 ");
break;
case 2:
lcd_gotoxy(1,2);
printf(lcd_putc,"\nF : 3 ");
break;
case 3:
lcd_gotoxy(1,2);
printf(lcd_putc,"\nF : 4 ");
break;
case 4:
lcd_gotoxy(1,2);
printf(lcd_putc,"\nF : 5 ");
break;
}
} |
|
|
 |
temtronic
Joined: 01 Jul 2010
Posts: 9244
Location: Greensville,Ontario
|
|
| Posted: Thu Sep 10, 2015 4:59 am |
|
|
Looks like the classic 'No debounce on the switches' problem.
Do a search for 'debounce' here and the code library for 20-30 solutions.
Also describe actual hardware( switch type, pullup, filter cap,etc.)
Jay |
|
|
Sam_40
Joined: 07 Jan 2015
Posts: 127
|
|
| Posted: Thu Sep 10, 2015 6:51 am |
|
|
| IMHO, I think its the "\f". |
|
|
PCM programmer
Joined: 06 Sep 2003
Posts: 21708
|
|
| Posted: Thu Sep 10, 2015 10:00 am |
|
|
| Quote: | void freq(char menu)
{
lcd_putc("\f");
switch(menu){
case 0:
lcd_gotoxy(1,2);
printf(lcd_putc,"\nF : 1 ");
break; |
You go to the start of line 2 with the lcd_gotoxy(). Then you send a
newline in the printf. Where will the \n take you to ? You won't be on line 2. |
|
|
|
|
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
|
Powered by phpBB © 2001, 2005 phpBB Group
|
FAQ 
Search
Register
Profile 
Log in to check your private messages 
Log in
