View previous topic :: View next topic |
Author |
Message |
cwilson
Joined: 24 Oct 2016 Posts: 1
|
4x4 keypad with pic16f877 |
Posted: Mon Oct 24, 2016 6:45 pm |
|
|
Hi I'm a year 1 student in Fiji and working on a project using a 4x4 keypad. My problem is that the ccs pic c compiler only has a driver for a 4x3 keypad and not a 4x4. Please help. |
|
|
ezflyr
Joined: 25 Oct 2010 Posts: 1019 Location: Tewksbury, MA
|
|
Posted: Mon Oct 24, 2016 7:06 pm |
|
|
Hi,
Hmmm, how hard did you look???
There are numerous examples of 4x4 keypad drivers available on the forum. Here is one by PCM programmer: http://www.ccsinfo.com/forum/viewtopic.php?t=28022&start=14
John _________________ John
If it's worth doing, it's worth doing in real hardware!
Last edited by ezflyr on Mon Oct 24, 2016 7:30 pm; edited 1 time in total |
|
|
temtronic
Joined: 01 Jul 2010 Posts: 9246 Location: Greensville,Ontario
|
|
Posted: Mon Oct 24, 2016 7:09 pm |
|
|
You need to look at and understand how CCS coded the 4 by 3 driver, then decide how to add one column or row.
If we just give you the code, then you've not learned anything.
Jay |
|
|
|